Tag Archives: motorcycle crash expert

Motorcycle crash expert Dr. John Lloyd has served attorneys nationwide for 25+ years in biomechanics, human factors, helmet testing and motorcycle accident expert

John Lloyd PhD

Curriculum Vitae – Resume

John Lloyd, PhD, CPE, ACTAR

CV – Curriculum Vitae – Resume

Board Certified Expert Witness
Biomechanics, Human Factors and Accident Reconstruction
Specializing in Motorcycle Crashes and Helmet Protection

Mailing address: 32824 Michigan Avenue, San Antonio, Florida 33576

Telephone: (813) 624-8986

Email: John@DrBiomechanics.com

(Curriculum Vitae – Resume last updated November 3rd, 2024)

Expertise

Education and Training

  • Ph.D. Ergonomics, Loughborough University, Leicestershire, England, 2002
  • B.Sc. (Honors) Ergonomics, Loughborough University of Technology, England, 1992
  • D.P.S. Loughborough University of Technology, Leicestershire, England, 1991

Certification and Registration

  • CPE (#725) Certificant, Board of Certification in Professional Ergonomics, 1995
  • M.Erg.S. Member of The Ergonomics Society Professional Register, 1996
  • CBIS (#6667) Certified Brain Injury Specialist (Cognitive Rehabilitation), Academy of Certified Brain Injury Specialists, 2010-13
  • ACTAR (#4658) Accredited Traffic Accident Reconstructionist

Present Appointments

  • President
    Lloyd Industries, Inc. San Antonio, FL.
  • Research Director
    BRAINS, Inc., San Antonio, FL.

Past Employment

2002-2022 Courtesy Assistant Professor
Department of Chemical and Biomedical Engineering, College of Engineering, University of South Florida, Tampa, FL

09/11-02/16 Director of Traumatic Brain Injury Laboratory / Program Specialist
James A Haley Veterans Hospital, Tampa, FL

08/09-09/11 Associate Director
Veterans Administration, Health Services Research and Development (HSR&D) / Rehabilitation Research and Development (RR&D) Research Center of Excellence, Tampa, FL

10/99-08/09 Director of Research Laboratories
Patient Safety Center of Inquiry, James A. Haley Veterans Hospital, Tampa, FL

05/98-05/00 Director of Information Systems
UTEK Corporation, Plant City, FL

06/96-10/99 Acting Director
Center for Product Ergonomics, University of South Florida, Tampa, FL

01/96-05/96  Ergonomics Laboratory Manager / Research Ergonomist
Center for Product Ergonomics, University of South Florida, Tampa, FL

07/93-01/96  Principal Ergonomist
The Ergonomics Institute, Hauppauge, NY

07/92-07/93  Ergonomics /Biomechanics Consultant
Biomechanics Corporation of America, Melville, NY

07/90-07/91  Research Ergonomist
Liberty Mutual Research Center, Hopkinton, MA

12/88-07/90  Human Reliability Consultant
R M Consultants Ltd., Warrington, Cheshire, England

Professional Memberships

Awards and Honors

  • Article of the Year Award (1998)
  • Certificate of Excellence awarded by VHA Patient Safety Research Center (2002)
  • Author of Top 10 cited paper (2006-2008) in International Journal of Nursing Studies

Professional Training Courses

  • 1990   Human Factors in Occupational Health & Safety, Harvard School of Public Health
  • 1992   Ergonomics and Design, Loughborough University of Technology
  • 1999   Ergonomics Workshop: 3D Static Strength Prediction, University of Michigan
  • 2004   Vicon BodyBuilder & Polygon training workshop, Vicon Motion Systems, Inc.
  • 2009   LabView Introductory and Advanced workshops, National Instruments
  • 2011   Successful Measurement of Dynamic Force, Pressure, and Acceleration, presented by PCB Piezotronics
  • 2011   Using Mimics to create 3D Finite Element models from Radiographic CT and MR images, presented by Materialize
  • 2011   Matlab fundamentals, presented by The Mathworks
  • 2011   Cognitive Rehabilitation workshop, hosted by North American Brain Injury Society
  • 2012   Brain Computer Interface workshop, hosted by Florida Hospital, Orlando
  • 2013   Pediatric Pathology for Forensic Pathologists, hosted by AAFS, Washington DC
  • 2014   EDC Accident Reconstruction Course – HVE EDCRASH / EDSMAC, Miami, FL (40 Hr.)
  • 2015   Reconstruction and Analysis of Motorcycle Crashes – SAE International (Society of Automotive Engineering), Detroit, MI (8 hr.)
  • 2015   Investigation of Motorcycle Crashes – Institute of Police Training and Management, Jacksonville, FL (40 hr.)
  • 2015 Automating Hardware Control and Advanced Programming Techniques in MATLAB. The MathWorks. Tampa, FL.
  • 2015 Data Acquisition using Matlab. The MathWorks. Tampa, FL.
  • 2018 Traffic Crash Analysis using Virtual Crash – Forensic Training Group, Nashville, TN (32 hr.)
  • 2018 Symposium on Traffic Safety – IPTM, Orlando, FL (32 hr.)
  • 2018 Energy Methods and Damage Analysis in Traffic Crash Reconstruction – Institute of Police Training and Management, Jacksonville, FL. (40 hr.)
  • 2018 Advanced Analysis of Driver Responses – Institute of Police Training and Management, Jacksonville, FL. (40 hr.)
  • 2020 Crash Evaluation: Analyzing the Impaired Driver – Crash University (32 hr.)
  • 2021  Ariel Photogrammetry for Crash and Crime Scenes Using Pix4D – Forensic Mapping Solutions (16 hr.)
  • 2021 FAA Remote Pilot-in-Command Training (16 hr.)
  • 2021 Virtual CRASH Live Training (24 hr.)
  • 2022 Pix4Dmatic and Pix4Dsurvey essentials (24 hr.)
  • 2023 Motorcycle Collision Reconstruction – LightPoint (32 hr.)
  • 2023 Traffic Crash Reconstruction Refresher – Northwestern University (40 hr.)
  • 2023 Recon 3D certification course – Ai2-3D (4 hr.)
  • 2023 Cloud Compare: Zero to Hero – Ai2-3D (8 hr.)
  • 2024 Response User Forum – Driver Research Institute (24 hr.)

Webinar Training Courses

  • 2018 Traffic Collision Technology – Laser Technology, Inc.
  • 2019 Drone Mapping: Ground and Aerial Measurements – Laser Technology, Inc.
  • 2020 EinScan Pro 2X Plus 
  • 2020 Pix4Dmapper for Collision Reconstruction
  • 2020 DTS – Principles of Dynamic Data Collection
  • 2020 FARO Zone 3D: Advanced Animation Techniques
  • 2020 FARO Zone 3D: Utilizing EDR Data in the FARO Zone Software
  • 2020 FARO SCENE Software: Creating Courtroom Deliverables
  • 2021 CRASH SAFETY SOLUTIONS: Factors that Influence Nighttime Recognition
  • 2023 Pix4Dmatic and Pix4DSurvey Essentials 
  • 2023 State of EDR in the US: CDR Update (NAPARS)
  • 2023 Aerial Photogrammetry in Crash Reconstruction (NAPARS)
  • 2023 Statistics for Crash Analysis (NAPARS)
  • 2023 Monte Carlo Analysis in Crash Reconstruction (NAPARS)
  • 2024 A Systematic Approach to Nighttime Crash Scene Investigations (NAPARS)
  • 2024   Advances in Motorcycle Technology – Addressing New Vehicle Safety Features within Rider Training – Advanced Rider Assistance Systems (SMSA)

Editorial / Reviewer Appointments 

  • Occupational Health and Safety magazine, Stevens Publishing, Waco, TX
  • Workplace Ergonomics, Stevens Publishing, Waco, TX
  • Columnist for Ergonomics Intelligence Report, James Publishing, Santa Ana, CA
  • Book reviewer for Ergonomics In Design, Human Factors and Ergonomics Society
  • Journal of Rehabilitation Research and Development, Department of Veterans Affairs, Washington, DC
  • Applied Ergonomics, Taylor and Francis, London
  • Ergonomics, Taylor and Francis, London
  • Department of Veterans Affairs HSR&D Scientific Merit Review Committee
  • Department of Veterans Affairs RR&D Scientific Merit Review Committee
  • Natural Sciences and Engineering Research Council of Canada (NSERC), grant reviewer for federal funding agency
  • Applied Ergonomics Journal
  • National Neurotrauma Society 2016 Symposium
  • Journal of Safety
  • New England Journal of Medicine
  • Nebraska University Press
  • Journal of Forensic Sciences

Grants and Funded Research

  1. ‘Biomechanical assessment of dynamic postural sway in healthy elderly.’ Role: Co-Investigator. Sponsored by Institute for Aging. Awarded $7,500, 1996.
  2. ‘Redesigning patient handling tasks and equipment to prevent nursing back injuries.’ Role: Co-Investigator. Sponsored by Department of Veterans Affairs RR&D. Awarded $305,000, 1997.
  3. ‘Effect of wrist exposures on median nerve conduction: Pilot study.’ Role: Co-Investigator. VA RR&D. Awarded $50,000, 1997.
  4. ‘Evaluation prototype: Exam room of the future.’ Role: Co-Investigator. Sponsored by BHM Medical, Inc. and Department of Veterans Affairs. Awarded $60,000, 1998.
  5. ‘Patient Safety Center of Inquiry.’ Role: Associate Director and Co-Investigator. Sponsored by VA HSR&D. Awarded $1,500,000, 1999.
  6. ‘VISN-Wide Deployment of a Back Injury Prevention Program for Nurses: Safe Patient Handling and Movement.’ Role: Co-Investigator. Sponsored by VA HSR&D. Awarded $2.4 million, 2001.
  7. Research Enhancement Award Program: ‘Safe Patient Mobility.’ Role: Associate Director and Co-Investigator. Sponsored by VA HSR&D. Awarded $1.1 million, 2001.
  8. ‘Development and Validation of Measurement System to Quantify Spinal Compression.’ Role: Co-Investigator.’ Sponsored by VISN8 Patient Safety Center of Inquiry. Awarded $5,000, 2001.
  9. Research Enhancement Award Program: ‘Technology to Prevent Adverse Events in Rehabilitation.’ Role: Associate Director and Co-Investigator. Sponsored by VA RR&D. Awarded $1.35 million, 2002.
  10. Enhancement of RR&D Research Laboratory Capabilities at the Tampa Veterans Administration Medical Center. Role: Principal Investigator. Sponsored by VA RR&D. Awarded $125,000, 2002.
  11. ‘Biomechanical assessment of wheelchair transfers toward upper extremity preservation in persons with SCI.’ Role: Co-Principal Investigator. VA RR&D. Awarded $50,000, 2002.
  12. ‘Patient Safety Center of Inquiry.’ Role: Associate Director and Co-Investigator. Sponsored by VA HSR&D. Awarded $2,000,000, 2003.
  13. ‘Development of an Instrumented Mannequin for Restraint and Control Training,’ Role: Principal Investigator. Sponsored by Department of Veterans Affairs, Office of Occupational Health and Safety. Awarded $75,000, 2003.
  14. ‘Validation of the Actiwatch as a Pain Treatment Outcome Measure.’ Role: Co-Investigator. Sponsored by VA RR&D. Awarded $200,325, 2005.
  15. ‘Folding Motorized Prone-Cart.’ Role: Co-Investigator. Sponsored by VA RR&D. Awarded $357,100, 2005.
  16. ‘Development of Force Gloves for Biomechanical Evaluation of Dynamic Patient Handling Tasks.’ Role: Co-Investigator. Sponsored by University of South Florida Patient Safety Foundation. Awarded $7,000, 2005.
  17. ‘Biomechanical Evaluation of Patient Transport Activities.’ Role: Co-Investigator. Sponsored by University of South Florida Interdisciplinary Grant Program, Dane Industries, Inc. Awarded $25,000, 2005.
  18. Tampa VA Shared Equipment Evaluation Program. VHA. Awarded $272,000, 2005.
  19. ‘Evaluation of Assistive Transfer Devices to Preserve UE Function in SCI.’ Role: Principal-Investigator. Sponsored by VA RR&D. Awarded $474,300, 2007.
  20. Center of Excellence: ‘Maximizing Rehabilitation Outcomes.’ Role: Associate Director. Sponsored by VA HSR&D / RR&D. Awarded $4,100,000, 2009.
  21. ‘Development of Headwear to Prevent Fall-Related Injuries in Elderly Persons.’ Role: Co-Investigator / Biomechanist. Sponsored by National Institutes of Health, Small Business Innovation Research. Awarded $1,000,000, July 2010.
  22. ‘Threats to Skin Integrity Associated with Ceiling Lift Sling Use in Persons with SCI.’ Role: Principal Investigator. Sponsored by Department of Veterans Affairs, Office of Occupational Health and Safety. $600,000, February 2011.
  23. ‘Biomechanical Evaluation of Techniques Associated with Prevention and Management of Disturbed Behavior – Phase 2’ VA Portland. Role: Principal Investigator. Awarded $60,000, February 2011.
  24. Equipment grant for Traumatic Brain Injury program. VA RR&D. Role: Principal Investigator. Awarded $239,000, April 2011
  25. ‘Biomechanical Evaluation of Techniques Associated with Prevention and Management of Disturbed Behavior – Phase 3’ VA Portland. Role: Principal Investigator. Awarded $68,700, December 2011.
  26. Development and Evaluation of a Sling-Less Lift System. VA RR&D. Role: Principal Investigator. Awarded $730,000. ** best proposal score in history of JAHVA
  27. Development of Motorcycle Helmets to Protect Against Traumatic Brain Injury. CDC / NCIPC. Role: Principal Investigator. $225,000. Submitted April 2015. Not funded

Book Chapters

  1. Lloyd JD and Haslam RA, “Traumatogens Associated with Carpal Tunnel Syndrome.” In Harbison, R. (ed.) Industrial Toxicology Handbook, 5th edition. Mosby Publishers, St. Louis 1998
  2. Lloyd JD, “Biodynamics of back injury: Manual lifting and loads.” In Charney, C and Hudson A (eds.). Back Injury Among Healthcare Workers: Causes, Solutions and Impacts. CRC Press 2003
  3. Lloyd JD, “Patient Handling Technologies.” In Nelson, A. (ed.). Handle with Care: A Practice Guide for Safe Patient Handling and Movement. Springer Publishing Company 2006
  4. Lloyd JD and Baptiste A, “Patient Handling Technologies.” In: Charney, W (ed.). Handbook of Modern Hospital Safety, second edition. Taylor and Francis 2009
  5. Pappas IP, Del Rossi, G, Lloyd J, Gutmann J, Sackellares CJ et al. Synchronization and network measures in a concussion EEG paradigm. In Models, Algorithms and Technologies for Network Analysis. 2014.
  6. Lee WA and Lloyd JD “Biomechanical, Epidemiologic and Forensic Considerations of Pediatric Head Injuries” In Freeman MD and Zeegers M (eds). Forensic Epidemiology: Principles and Practice. Elsevier publishers, Oxford UK. 2016.

Scientific and Medical Journal Articles (Peer Reviewed)

  1. Nelson A, Gross C and Lloyd JD, (1997) Preventing musculoskeletal injuries in nurses: directions for future research. SCI Nursing 14(2): 45–51
  2. Gross C, Lloyd JD, Nelson A and Haslam RA, (1998) Carpal tunnel syndrome: A review of the literature with recommendations for further research. Florida Journal of Public Health 9(1): 22–28
  3. Lloyd JD and Kelleher, V, (2000). Patient safety center of inquiry plans effective dissemination of its findings throughout the VA. Veterans Health System Journal Aug 55–56.
  4. Nyland J, Quigley P, Huang C, Lloyd JD, Harrow J and Nelson A, (2000) Preserving transfer independence among individuals with spinal cord injury. Spinal Cord 2000 38(11): 649–657
  5. Nelson A, Tiesman T and Lloyd JD (2000) Get a handle on safe patient transfer and activity. Journal of Nursing Management 31(12): 47
  6. Baptiste A, Tiesman H, Nelson A and Lloyd JD (2002) Technology to Reduce Nurses’ Back Injuries. Rehabilitation Nursing 27(2), 43-44, 58.
  7. Smith LC, Weinel D, Doloresco L and Lloyd JD (2002) A clinical evaluation of ceiling lifts: lifting and transfer technology for the future. SCI Nursing 19(2): 75–7
  8. Nelson A, Owen B, Lloyd JD, Fragala G, Matz M, Amato M, Bowers J, Moss-Cureton S, Ramsey G and Lentz K, (2003) Safe Patient Handling and Movement: Preventing back injury among nurses requires careful selection of the safest equipment and techniques. American Journal of Nursing 103(3): 32–43
  9. Haiduven D, Baptiste A, Luther S, Lloyd JD, Wilkinson S and Bidot P. (2003) Development of a seated device for measuring diurnal variability in stature compression. Journal of Musculoskeletal Research 7(1): 49–60
  10. Nelson A, Lloyd JD, Gross C and Menzel N. (2003). Preventing Nursing Back Injuries – Redesigning Patient Handling Tasks. AAOHN Journal 51(3): 126–134
  11. Lloyd JD and Baptiste A. (2006). Friction reducing devices for lateral patient transfers: a biomechanical evaluation. American Association of Occupation Health Nursing (AAOHN). 54(3): 113–119
  12. Baptiste A, Boda SV, Nelson AL, Lloyd JD and Lee W. (2006) Friction-reducing devices for lateral patient transfers: a clinical evaluation. American Association of Occupation Health Nursing (AAOHN) 54(4): 173–80
  13. Nelson A, Matz M, Chen F, Siddharthan K, Lloyd JD and Fragala G, (2006) Development and Evaluation of a Multifaceted Ergonomics Program To Prevent Injuries Associated with Patient Handling Tasks International Journal of Nursing Studies 43: 717–733
  14. Gironda RJ, Lloyd JD, Clark ME and Walker RL. (2007). Preliminary Evaluation of the Reliability and Criterion Validity of the Actiwatch-Score. Journal of Rehabilitation Research and Development 44 (2): 223–30
  15. Bowers B, Lloyd J, Lee W, Powell-Cope G and Baptiste A. (2008). Biomechanical evaluation of injury severity associated with patient falls from bed. Rehabilitation Nursing 2008 33(6): 253–9
  16. Schulz BW, Lee WE and Lloyd JD. (2009). Estimation, Simulation, and Experimentation of a Fall from Bed. Journal of Rehabilitation Research & Development 2009 45(8): 1227 — 1236
  17. Schulz BW, Lloyd JD and Lee WE, (2010). The Effects of Everyday Concurrent Tasks on Overground Minimum Toe Clearance and Gait Parameters. Gait and Posture May 2010 32(1): 18–22
  18. Waters TR, Short M, Lloyd, JD, Baptiste A, Butler L, Peterson C and Nelson A, (2011) AORN Ergonomic Tool 2: Positioning and Repositioning the Supine Patient on the OR Bed. AORN Journal 93(4): 445–449
  19. Hughes NL, Nelson A, Matz M and Lloyd J. (2011). AORN Ergonomic Tool 4: Solutions for Prolonged Standing in Perioperative Settings. AORN Journal 93(6): 767–774
  20. Spera S, Lloyd J, et al. (2011) AORN Ergonomic Tool 5: Tissue Retraction in the Perioperative Setting. AORN Journal 94(1): 54-8.
  21. Water T, Lloyd J, Hernandez E & Nelson A. (2011) Ergonomics Tool 7: Pushing, Pulling and Moving Equipment on Wheels. AORN Journal 94; (3): 254-260
  22. Lloyd et al. (2011) Biomechanical Evaluation of Infant Shaking compared with Pediatric Activities of Daily Living. Journal of Forensic Biomechanics
  23. Lloyd J. (2013) Biomechanical Evaluation of Head Kinematics During Infant Shaking Versus Pediatric Activities of Daily Living. Journal of Head Trauma Rehabilitation. SEP-OCT; 28; 5; pE60-pE60
  24. Lloyd J. (2013). Biomechanics of Brain Injuries Associated with Short Falls in Children. Journal of Head Trauma Rehabilitation. SEP-OCT; 28; 5; pE61-pE61
  25. Lloyd J. (2013). BRAINS Researchers Reveal Deficiencies in Football Helmet Design. Journal of Head Trauma Rehabilitation. SEP-OCT; 28; 5; pE55-pE55
  26. Caccese V, Lloyd J, Ferguson J. (2014). An Impact Test Apparatus for Protective Head Wear Testing Using a Hybrid III Head-Neck Assembly. Experimental Techniques
  27. Lloyd J & Conidi F. (2015). Brain Injury in Sports. Journal of Neurosurgery. October.
  28. Lloyd J. (2016). Biomechanics of Solo Motorcycle Accidents. Journal of Forensic Biomechanics
  29. Sabbagh JJ, Fontaine SN, Shelton L, Zhang B, Hunt J, Lee DC, Lloyd J, Dickey CA. (2016). Non-contact accelerational head injury produces transient cognitive deficits and neuropathological changes.  Journal of Neurotrauma
  30. Lloyd J. (2016). Biomechanics of Motorcycle Helmet Protection. Journal of Neurotrauma. Conference Abstract # PSB-199.
  31. Lloyd J. (2017). Biomechanical Evaluation of Motorcycle Helmets: Protection Against Head and Brain Injuries. Journal of Forensic Biomechanics.
  32. Barrett B, Phillips S, Lloyd J, Cowan L, Friedman Y et al. (2022) Evaluation of Protective Properties of Commercially Available Medical Helmets: Are Medical Helmets Protective? Journal of Patient Safety 18 (1).
  33. Lloyd J. (2022). Crash-Related Motorcycle Helmet Retention System Failures. Journal of Forensic Biomechanics 13:400.
  34. Lloyd J. (2024). Traumatic Brain Injuries in Helmeted Motorcycle Crashes. STAPP Journal / SAE (pending).

Journal Articles (Non-Peer Reviewed)

  1. Lloyd JD: (1995) Getting Injured Employees Back to the Workplace – Return to Work Planning. Workplace Ergonomics Magazine Steven Publishing, TX
  2. Lloyd JD: (1995) A Holistic Ergonomic Approach for Successful Return to Work. Chartered Property Casualty Underwriters Society, Malvern, PA
  3. Lloyd JD and Gross C: (1996) Ergonomic evaluation of pen design and writing characteristics. Ergonomics Intelligence Report James Publishing, Santa Ana, CA
  4. Lloyd JD and Gross C: (1996) Biomedical stress test for carpal tunnel syndrome. Ergonomics Intelligence Report James Publishing, Santa Ana, CA
  5. Lloyd JD: (1996) How to correctly set up an ergonomic office workstation. Ergonomics Intelligence Report James Publishing, Santa Ana, CA
  6. Lloyd JD: (1996) A checklist for the evaluation of ergonomic stress at computer workstations. Ergonomics Intelligence Report, James Publishing, Santa Ana, CA
  7. Gross C, Lloyd JD and Tabler R: Ergonomic Analysis of Pen Comfort and Wrist Dynamics While Writing. Unpublished. University of South Florida, Tampa, FL
  8. Gross C and Lloyd JD: (1997) HumanTRAC: A New Method for Rapid Product Ergonomic Assessments. Unpublished. University of South Florida, Tampa, FL
  9. Powell-Cope G, Moore H, Kearns W, Baptiste A, Lloyd JD, Applegarth S and Nelson A. (2005). The Case for Preventing Wandering and Associated Adverse Events for Veterans with Dementia. TIPS Nov/Dec 5(6): 3
  10. Investigating crashes 4 times faster with viDoc & PIX4Dmatic. Pix4D Industry Insights 1/29/2023.
  11. Motorcycle Rider and Conspicuity. BMW Motorcycle Owners of America Owner’s News. September 2024.
  12. Why I am Anal About My Tires. BMW Motorcycle Owners of America Owner’s News. October 2024.
  13. The Eyes of a Rider. BMW Motorcycle Owners of America Owner’s News. November 2024.

Conference Proceedings

  1. Research Basis for the Development of a Dynamic Median Nerve Stress Test. Proceedings of American Occupational Health Conference. Orlando, FL, May 16, 1997
  2. ‘Work-related carpal tunnel syndrome’. Presented at Alabama Governor’s safety and health conference. Birmingham, AL. August 29, 2000
  3. Lloyd JD and Westhoff O. Development of an Intelligent Mannequin for Research in Safe Patient Handling and Movement. Proceedings of the Sixth Annual Safe Patient Handling and Movement Conference. Clearwater, FL, March 2, 2006
  4. Lloyd JD. Biomechanical Evaluation of Patient Transport Technologies – a project in development. Proceedings of the Sixth Annual Safe Patient Handling and Movement conference. Clearwater, FL, March 2, 2006
  5. Lloyd, JD. Developing Helmet Standards and Testing Methods to Protect from Brain Injury. Submitted to Proceedings of the ASTM Symposium on Concussion in Sports. Atlanta, GA. November 20, 2012
  6. Lloyd JD, Willey E & Lee W. Biomechanical Evaluation of Head Kinematics During Infant Shaking Versus Pediatric Activities of Daily Living. Proceedings of 67th American Academy of Forensic Sciences annual meeting, Orlando, FL. 2015.
  7. Lloyd JD & Lee WE. Biomechanical Evaluation of Inflicted Head Trauma. Proceedings of 67th American Academy of Forensic Sciences annual meeting, Orlando, FL. 2015.
  8. Lloyd JD. Biomechanics of Short Falls in Children. Proceedings of 67th American Academy of Forensic Sciences annual meeting, Orlando, FL. 2015.
  9. Lloyd JD. Biomechanical Evaluation of Shaken Impact Syndrome. Proceedings of 67th American Academy of Forensic Sciences annual meeting, Orlando, FL. 2015.
  10. Lloyd J. Biomechanics of Head and Brain Injury. Proceedings of 73rd American Academy of Forensic Sciences annual meeting. 2021.

Conference Abstracts

  1. Belsole RJ and Lloyd JD. Repetitive wrist movements: an adverse effect on median nerve conduction. American Society for Surgery of the Hand (ASSH). 54th Annual Meeting, 1998.
  2. Lloyd JD and Belsole RJ. Neurovascular considerations of median nerve neuropathy and implications for clinical diagnosis. American Society for Surgery of the Hand (ASSH). 54th Annual Meeting, 1998.
  3. Lloyd JD and Belsole RJ. Repetitive wrist movements: an adverse effect on median nerve conduction. University of South Florida Health Sciences Center Research Day, February 1999.
  4. Lloyd JD, Nelson AL, Gross CM and Menzel N. Redesigning Patient Handling Tasks and Equipment to Prevent Nursing Back Injuries. Department of Veterans Affairs, Health Services Research and Development. 19th annual meeting, February 2001.
  5. Lloyd JD. Repetitive Wrist Movements: Clinical Implications for Ergonomic Workplace Surveillance. International Society for Occupational Ergonomics and Safety annual meeting, June 2005.
  6. Lloyd JD. Clinical Biomechanics of Wheelchair Transfers and Repositioning Tasks in SCI. 20th Congress of the International Biomechanics Society and 29th Annual Meeting of the American Society of Biomechanics, August 2005.
  7. Lloyd JD and Harrow JJ. Clinical Biomechanics of Wheelchair Transfers in Spinal Cord Injury. American Paraplegic Society Annual meeting, September 2005.
  8. Harrow JJ and Lloyd JD. Biomechanical Assessment of Pressure-Relief and Repositioning Tasks in Persons with SCI. American Paraplegic Society annual meeting, September 2005.
  9. Lloyd JD and Harrow JJ. Clinical Biomechanics of Wheelchair Transfers in Spinal Cord Injury. American Association of SCI Nursing annual meeting, September 2005.
  10. Harrow JJ and Lloyd JD. Biomechanical Assessment of Pressure-Relief and Repositioning Tasks in Persons with SCI. American Association of SCI Nursing annual meeting, September 2005.
  11. Lloyd JD and Harrow JJ. Biomechanical Assessment of Independent Wheelchair Transfers in Persons with SCI. American Association of SCI Nursing annual meeting, September 2006.
  12. Campbell RR, Lloyd JD and Gutmann J. VHA Trends in the total costs of care for the polytrauma cohort: Disproportionate impact of post-acute inpatient care. Federal Interagency Conference on Traumatic Brain Injury, 2011
  13. Lloyd JD, Gutmann J and Arslan O. Toward Biomechanical Understanding of Brain Kinematics Associated with TBI using cadaveric specimens. Federal Interagency Conference on Traumatic Brain Injury, 2011
  14. Lloyd JD, Gutmann J and Del Rossi G. Do Ill-Fitting Helmets Amplify the Risk of Head Injury Among Youth Football Players? – A Biomechanical Analysis, with Discussion for Applicability to Military Protection. Federal Interagency Conference on Traumatic Brain Injury, 2011
  15. Lloyd JD, Gutmann J, Craighead J & Del Rossi G. Do Helmets Prevent Concussion? 8th Annual Conference of Blast TBI, December 2011, Tampa.
  16. Lloyd JD, Gutmann J, Craighead J & Arslan O. Biomechanics of Blast TBI. 8th Annual Conference of Blast TBI, December 2011, Tampa.
  17. Lloyd JD & Lee WE. Biomechanics of Inflicted Head Trauma. Presented at 4th Penn State Hershey International Conference on Pediatric Abusive Head Trauma, June 27-28, 2013, Burlington, VT.
  18. Lloyd J & Conidi F. How well do Football Helmets Protect Against Concussion and Traumatic Brain Injuries? Presented at 2014 annual meeting of the American Academy of Neurology.
  19. Sackellares JC, Lloyd J & Vega D EEG of Concussive Impact in Football. Submitted to American Academy of Sports Neurology Sports Concussion meeting, July 2014. Chicago.
  20. Lloyd J & Conidi F. Preventing Concussion in Sports – A Proposed Biomechanical Threshold. Submitted to American Academy of Sports Neurology Sports Concussion meeting, July 2014. Chicago.
  21. Lloyd JD. Military Helmets May Provide Little Protection Against Traumatic Brain Injury. Presented at Military Health System Research Symposium, August 2014. Fort Lauderdale.
  22. Lloyd JD, Willey E & Lee W. Biomechanical Evaluation of Head Kinematics During Infant Shaking Versus Pediatric Activities of Daily Living. Accepted for presentation at American Academy of Forensic Sciences 2015 annual meeting, Orlando, FL.
  23. Lloyd JD & Lee WE. Biomechanical Evaluation of Inflicted Head Trauma. Accepted for presentation at American Academy of Forensic Sciences 2015 annual meeting, Orlando, FL.
  24. Lloyd JD. Biomechanics of Short Falls in Children. Accepted for presentation at American Academy of Forensic Sciences 2015 annual meeting, Orlando, FL.
  25. Lloyd JD. Biomechanical Evaluation of Shaken Impact Syndrome. Accepted for presentation at American Academy of Forensic Sciences 2015 annual meeting, Orlando, FL.
  26. Lloyd JD & Conidi FX. Biomechanical Evaluation of Helmet Protection Against Concussion and TBI. Presented at International State-of-the-Science Meeting on the Biomedical Basis for Mild Traumatic Brain Injury (mTBI) Environmental Sensor Threshold Values. November 2014. MacLean, VA.
  27. Lloyd JD, Sabbagh J & Dickey C. Investigating the Effects of Mild Blast Injury on TBI Symptoms and Tau Pathology. Presented at International State-of-the-Science Meeting on the Biomedical Basis for Mild Traumatic Brain Injury (mTBI) Environmental Sensor Threshold Values. November 2014. MacLean, VA.
  28. Conidi FX and Lloyd JD. Incidence of Traumatic Brain Injury in retired NFL Players. Correlation with Diffusion Tensor MRI Imaging and Neuropsychological Testing. Annual meeting of the American Academy of Neurology. 2016.
  29. Lloyd J. Brain Injury in Sports. North American Brain Injury Society 13th Annual Conference on Brain Injury. 2016.
  30. Lloyd J. Biomechanics of Motorcycle Helmet Protection. National Neurotrauma Society. 2016.
  31. Lloyd J. Biomechanics of Head and Brain Injury. American Academy of Forensic Sciences. 2021.

Technical Reports

  1. Lloyd JD: Controls and displays. In: Whalley S et al: Ergonomic guidelines for the offshore oil and gas industry. R.M. Consultants Ltd., Warrington, England, 1989.
  2. Lloyd JD: Cumulative trauma disorders of the upper extremities – Experiment report: Liberty Mutual Insurance Co., Boston, MA, 1991.
  3. Lloyd JD: A human factors approach to the design and implementation of mobile data terminals in British Gas service engineer’s vehicles. Thesis – University of Technology, Loughborough, Leicestershire, England, 1992.
  4. Nair C and Lloyd JD: Ergonomic assessment of the N250 flight deck. PT. Industri Pesawat Terbang Nusantara, Indonesia, 1992.
  5. Rome D, Ratner D, Braveman K and Lloyd JD: Mannequin tutorial. In: Mannequin High – ergonomics in design. Biomechanics Corporation of America, Melville, NY, 1992.
  6. Lloyd JD: Ergonomic assessment of risk and liability for heavy electronics manufacturing facility. Square D Company, Smyrna, TN, 1992.
  7. Lloyd JD: AADCAS Phase II – a comprehensive anthropometry and reach study using sonic digitization techniques. Grumman Aircraft Systems, Grumman Corporation, Bethpage, NY, 1992.
  8. Lloyd JD: Ergonomic workplace assessment for materials handling operations. Fujitsu Network Transmission Systems Inc., Richardson, TX, 1993.
  9. Lloyd JD: Ergonomic assessment of risk and liability for a precision electronics assembly process. Fujitsu Network Transmission Systems Inc., Richardson, TX, 1993.
  10. Lloyd JD: Corporate ergonomics program for safety and environmental compliance. Biomechanics Corporation of America, Melville, NY, 1993.
  11. Lloyd JD: Ergonomic assessment of risk and liability, including NIOSH lifting evaluation. Philip Morris USA, Cabarrus Manufacturing Center, NC, 1993.
  12. Lloyd JD: Engineering Workplace Assessment. Sony Music, Carrolton, GA, 1993.
  13. Lloyd JD: Ergonomic assessment of risk and liability for aftermarket product manufacturing division. Allied Signal, Greenville, OH, 1993.
  14. Lloyd JD: Wrist Stress Determination. U.S. Surgical Corporation, CT, 1993.
  15. Lloyd JD: Ergonomic assessment of risk and liability for heavy assembly operation. Nevamar Corporation, Odenton, MD, 1993.
  16. Lloyd JD: Ergonomic assessment of risk and liability for a medical laboratory. MetPath Laboratories, PA, 1993.
  17. Lloyd JD: Ergonomic assessment of risk and liability for an office facility. Allied Signal, RI, 1993.
  18. Lloyd JD: Ergonomic assessment of risk and liability for packaging and warehouse activities. Allied Signal, Jackson Facility, TN, 1993.
  19. Lloyd JD: Ergonomic assessment of risk and liability for furnace operators. Climax Molybdenum Company, IA, 1993.
  20. Lloyd JD: Ergonomic assessment of risk and liability for unskilled manufacturing tasks. Climax Molybdenum Company, Langeloth Plant, PA, 1993.
  21. Lloyd JD: Ergonomic workplace assessment and cost benefit analysis for garment manufacturing facility. Bestop Inc. – Prepared for Ergonomics Solutions Group, 1993.
  22. Lloyd JD: Ergonomic assessment for an aftermarket product manufacturing facility. Allied Signal, UT, 1993.
  23. Lloyd JD: Ergonomic assessment of risk and liability for sorting and packaging workstations. Allied Signal, Aftermarket Filter Division, NV, 1993.
  24. Mitchell D, Nair C and Lloyd JD: Ergonomic assessment of risk and liability for a vehicle servicing facility. Salt River Project, Tempe, AZ, 1993.
  25. Lloyd JD: Ergonomic assessment of risk and liability for paper manufacturing activities. Armstrong World Industries, Lancaster, PA, 1993.
  26. Mitchell D, Costello K and Lloyd JD: Ergonomic assessment of risk and liability for gas construction and maintenance activities. Long Island Lighting Company, New York, NY, 1993.
  27. Lloyd JD: EARLY Workplace Assessment for The Prevention of Musculoskeletal Injuries. Neapco Inc., Pottstown, PA, 1993.
  28. Lloyd JD: Ergonomic Assessment of Risk and Liability for a Nursing Home. Presbyterian Manors, Topeka, KS, 1993.
  29. Lloyd JD: EARLY Workplace Assessment for The Prevention of Musculoskeletal Injuries – Electronic Sales Presentation. Pioneer Electronics, CA, 1993.
  30. Lloyd JD: EARLY Workplace Assessment for The Prevention of Musculoskeletal Injuries. American Honda Aftermarket Accessories Division, 1993.
  31. Lloyd JD: Ergonomic Analysis of ‘The Upper Hand’ as a Tool for Reducing Physical Stress Caused by Shoveling Activities. Brookhaven National Laboratories, 1994.
  32. Lloyd JD and Casar T: LILCO’s Ergonomics Initiative. Long Island Lighting Company, Gas Construction and Maintenance Division, New York, NY, 1994.
  33. Lloyd JD: Corporate Ergonomics Program for Safety and Environmental Compliance. Nu-Kanu, Inc., Long Island, NY, 1994.
  34. Lloyd JD: Training Manual for Ergonomics Laboratory. PT. Industri Pesawat Terbang Nusantara, Indonesia, 1994.
  35. Lloyd JD: Ergonomic Analysis to Identify Physical Stressors in the Workplace. Parker-Hannifin Corporation / Gull, Hauppauge, NY; 1994.
  36. Lloyd JD: Ergonomic Evaluation of a Hospital Emergency Reception Station with Recommendations for Redesign. John T. Mather Memorial Hospital, Port Jeff, NY; 1994.
  37. Lloyd JD: Introduction to Ergonomics. Northrop Grumman Corporation, Bethpage, NY; 1994.
  38. Lloyd JD: Mannequin v 1.1 Training Manual. Northrop Grumman Corporation, Bethpage, NY; 1994.
  39. Lloyd JD: Ergonomic Evaluation of Musculoskeletal Stress Associated with Abrasive Coating Process. IKG Industries / Harsco Steel Division, Nashville, TN; 1995.
  40. Lloyd JD: Anthropometry – Designing for an International Population. United Airlines, CA; 1995.
  41. Lloyd JD: Ergonomic Guidelines for Control Position and Configuration. United Airlines; 1995.
  42. Krueger GP, Lloyd JD and Casar T: Ergonomic and Biomechanic Best-In-Class Assessment of Five .22 Caliber Rimfire and One .223 Cal Center fire Rifles. c/o Biomechanics Corporation of America, Melville, NY; 1995
  43. Lloyd JD: Rapid Ergonomic Assessment of Cumulative Hazards. Batesville Casket Company, Manchester, TN; 1995
  44. Lloyd JD: Ph.D. Course in Human Factors Engineering. Kennedy-Western University; 1995
  45. Lloyd JD: M.S. Course in Ergonomics. Kennedy-Western University; 1995.
  46. Lloyd JD: Ergonomic Assessment of Occupational Risk Factors. Techalloy Company Welding Division, Baltimore, MD; 1995
  47. Lloyd JD: Rapid Ergonomic Assessment of Cumulative Hazards – Hardware Loader and Hardware Unloader. Batesville Casket Company, Manchester, TN; 1995.
  48. Gross C, Lloyd JD and Tabler R: Ergonomics Evaluation of Five Writing Instruments. Center for Product Ergonomics, University of South Florida; 1996
  49. Lloyd JD: Demonstration of R&D capabilities for ergonomic evaluation of Harley-Davidson motorcycles. Harley-Davidson Motor Company, Milwaukee, WI; 1996
  50. Patient Care Ergonomics Resource Guide: Safe Patient Handling and Movement. Patient Safety Center of Inquiry. October 2001
  51. CD-ROM Interactive Training Program on Safe Patient Handling and Movement. VA Employee Education Service. 2002
  52. Instrumented Mannequin for Restraint and Control Training: Final Report. VA Occupational Health, Washington, DC, January 2004
  53. AORN Guidance Statement: Safe Patient Handling and Movement in the Perioperative Setting. AORN (Association of periOperative Registered Nurses), Denver, CO; 2007
  54. Harrow JJ, Lloyd JD, Gironda R, Nelson A, Luther S, Schulz B, Applegarth S, Baptiste A and Cresta T. Final Report – Clinical Biomechanics of Wheelchair Transfers in Spinal Cord Injury: A Pilot Study. Report # B2900P. VA Rehabilitation Research and Development Service, Washington, DC; 2007
  55. Lloyd, JD. Tailored Medical Helmets for Specific Patient Populations and Co-Morbidities. Patient Safety Center of Inquiry, Tampa, FL; 2012
  56. Lloyd, JD. Biomechanical Evaluation of Safe Footwear for Institutional Patients, Considering Flooring Materials and Conditions. Patient Safety Center of Inquiry, Tampa, FL; 2012
  57. Ferguson J, Caccese V, Lloyd J. Development of Headwear to Prevent Fall-Related Injuries in Elderly Persons. NIH grant final report. 2014.

Podium Presentations

  1. ‘Ergonomics In Action’ seminar discussing the importance of workplace ergonomics. Institute of Industrial Engineers, Chapter 76. Long Island, NY, January 1994
  2. ‘Mannequin Man-Modeling and HumanCAD Training Workshop.’ Northrop Grumman Corporation. Bethpage NY, December 1994
  3. ‘Biomechanics Evaluation and Comparison of Two Pole Climbing.’ Long Island Lighting Company, Hicksville, NY, September 1995.
  4. ‘Introduction to the Center for Product Ergonomics’ NASA Occupational Health Group, Kennedy Space Center, FL; May 1996.
  5. ‘Ergonomics Applications in Space’ Bayonet Point Hospital, FL; July 1996.
  6. ‘Beyond Bricks and Mortar – Innovations for Senior Living: Ergo-House.’ West Central Florida Area Agency on Aging conference; September 17, 1996.
  7. ‘Ergonomics in Action!’ ITESM International Conference, Mexico City; September 24, 1996.
  8. ‘Applied Ergonomics in Flightdeck Design’ ITESM International Conference, Mexico City; September 25, 1996.
  9. ‘Ergonomics Applications in Space’ Department of Environmental and Occupational Health, University of South Florida; October 1996.
  10. ‘Research Basis for the Development of a Dynamic Median Nerve Stress Test’ American Occupational Health Conference, Orlando, FL; May 16, 1997.
  11. Grand Rounds: ‘Ergonomic applications for Spinal Cord Injury patients’ James A. Haley Veterans Hospital, Tampa, FL; May 23, 1997.
  12. ‘Product Ergonomics’ OSHA Regional Conference, Clearwater, FL; July 16, 1997.
  13. ‘Elderly falling study’. USF Institute on Aging Annual Meeting, Tampa, FL; April 24, 1998.
  14. ‘Etiology of musculoskeletal disorders’. Prevention of Musculoskeletal Injuries in Healthcare Workers: State of the Science. Tampa, FL; May 14, 1998.
  15. ‘Breakthrough research in injury prevention: What technology has to offer’. Prevention of Musculoskeletal Injuries in Healthcare Workers: State of the Science. Tampa, FL; May 15, 1998.
  16. ‘Ergonomic Risk Factors in the Workplace.’ Occupational Health and Safety Administration (OSHA), Tampa, FL; February 18, 1999.
  17. ‘Introduction to the 3D Static Strength Prediction Model’. National Aeronautical and Space Administration (NASA), Kennedy Space Center, FL; May 14, 1999.
  18. ‘How to Evaluate Ergonomic Products’. National Aeronautical and Space Administration (NASA), Kennedy Space Center, FL; May 14, 1999.
  19. ‘Repetitive wrist movements: an adverse effect on median nerve conduction’. American Society for Surgery of the Hand (ASSH). 54th Annual Meeting, Boston, MA; September 1999.
  20. ‘VA Biomechanics Research Laboratory – Virtual Tour’. James A. Haley Veteran’s Hospital, Patient Safety Center Press-Day. November 15, 1999.
  21. ‘Patient Safety Center of Inquiry – Technology Innovations Division’. US GAO. March 29, 2000.
  22. ‘Work-related carpal tunnel syndrome’. Alabama Governor’s safety and health conference. August 29, 2000.
  23. ‘Factors contributing to injuries related to patient handling’. VISN 8 PSCI Safe Patient Handling Conference. January 8-10, 2001.
  24. ‘Criteria for evaluating and selecting safe patient care equipment’. VISN 8 PSCI Safe Patient Handling conference, St. Petersburg Beach, FL; January 8-10, 2001.
  25. ‘Redesigning At Risk Tasks: A Panel Discussion., Safe Patient Handling and Movement conference. St. Petersburg Beach, FL; January 8-10, 2001.
  26. Satellite Broadcasts on Safe Patient Handling and Movement. A two part series (4 hours) held August 2001 and repeated in November 2001. Part I includes the Ergonomic Workplace Assessment Protocol for Patient Care Areas. Part II includes Selecting the Right Equipment, Patient Assessment Criteria, Algorithms, and Use of Back Injury Resource Nurses.
  27. ‘New and Emerging Technology for Safe Patient Handling and Movement’ VISN 8 PSCI Safe Patient Handling Conference, Clearwater, FL; January 16-18, 2002.
  28. ‘Biomechanics Research Laboratory: A Virtual Tour’ VISN 8 PSCI Safe Patient Handling Conference, Clearwater, FL; January 16-18, 2002.
  29. ‘Biomechanical Evaluation of Friction Reducing Devices.’ James A. Haley Veterans Hospital Research Day, Tampa, FL; April 25, 2002.
  30. ‘Evaluation of Technology to Support Safe Patient Handling and Movement.’ Safe Patient Handling and Movement Conference, Clearwater, FL; March 4-7, 2003.
  31. ‘Ergonomic Comparison of Overhead Ceiling Lifts and Mobile Floor Lifts’ VISN 8 PSCI Safe Patient Handling Conference, Clearwater, FL; March 4-7, 2003.
  32. ‘New Directions in Technology for Safe Patient Handling and Movement’ VISN 8 PSCI Safe Patient Handling Conference, Clearwater, FL; March 4-7, 2003.
  33. ‘Clinical Applications in Rehabilitation Engineering’ University of South Florida MS Rehabilitation Engineering program July 2, 2003.
  34. ’Injury Epidemiology and Prevention’ University of South Florida MPH Program. August 9, 2003.
  35. ‘Equipment Fairs and Clinical Trials: Obtaining Staff Buy-In’ Safe Patient Handling Conference, Orlando, FL; 2004.
  36. ‘Evaluation of Friction Reducing Devices for Patient Lateral Transfers in Critical Care’. Safe Patient Handling Conference, Orlando, FL; 2004.
  37. ‘Patient Risks Related to Trapeze Bar Repositioning’. Safe Patient Handling Conference, Orlando, FL; 2004.
  38. ‘Demonstration of a Mechanical Lateral Transfer Accessory to Patient Ceiling Lift Systems’. Safe Patient Handling Conference, Orlando, FL; 2004.
  39. ‘Equipment Fairs and Clinical Trials: Obtaining Staff Buy-In’ Safe Patient Handling Conference. Orlando, FL; 2004.
  40. ‘Equipment Fairs and Clinical Trials’ Safe Patient Handling Conference. Clearwater, FL; 2005.
  41. ‘Biomechanical Assessment of Pressure-Relief and Repositioning Tasks in Persons with SCI’ AASCIN Conference, Las Vegas, NV; September 2005.
  42. ‘Biomechanical Evaluation of Patient Transport Technologies’ Safe Patient Handling and Movement Conference. St. Petersburg, FL; 2006.
  43. ‘Development of an Intelligent Mannequin for Research in Safe Patient Handling and Movement’ Safe Patient Handling and Movement Conference. St. Petersburg, FL; 2006.
  44. ‘Biomechanical Evaluation of Injury Severity Associated with Patient Falls from Bed’ Evidence-Based Falls Prevention Conference. St. Petersburg, FL; 2006.
  45. ‘Biomechanical Assessment of Independent Wheelchair Transfers in SCI’ AASCIN Conference, Las Vegas, NV; September 2006.
  46. ‘Lateral Patient Transfer using a Friction Reducing Device’. November 2006.
  47. ‘Vertical Patient Transfer using a Ceiling-mounted Full-Body Lift System’. November 2006.
  48. ‘Bed to Chair Transfer using a Powered Stand-Assist Lift’. November 2006.
  49. ‘Vertical Patient Transfer using a Floor-Based Full-Body Sling Lift’. November 2006.
  50. ‘Coefficient of Friction: The Science of Slips, Trips and Falls’. Florida Justice Association. February 2007.
  51. ‘Safe Patient Handling in Operating Rooms’. Safe Patient Handling and Movement Conference. Orlando, FL; 2008.
  52. ‘Biomechanical Evaluation of Patient Transport Tasks’. Safe Patient Handling and Movement Conference. Orlando, FL; 2008.
  53. ‘Car Transfer Technologies’. Safe Patient Handling and Movement Conference. Orlando, FL; 2008.
  54. ‘Evaluation of Friction Reducing Devices’. Safe Patient Handling and Movement Conference. Orlando, FL; 2008.
  55. ‘Biomechanical Evaluation of Protective Technologies for Fall Injury Prevention’. Evidence-Based Falls Prevention Conference. Clearwater, FL; 2008.
  56. ‘Development of Evidence- Based Algorithms for Safe Patient Handling of Orthopedic Patients’.  Invited paper presentation at the Sigma Theta Tau International Honor Society of Nursing, 19th International Nursing Research Congress, Singapore. 2008. (presented on behalf of project team by M. Doheny)
  57. Risks and solutions for safe patient handling in operating rooms. 9th Annual Safe Patient Handling and Movement Conference. Orlando. April 2009.
  58. ‘Transfer and Transport: Emerging technology and protocols for safe interdepartmental patient handling’. 9th Annual Safe Patient Handling and Movement Conference. Orlando. April 2009.
  59. ‘Helmet technology to minimize head injuries associated with falls’. 10th Annual Conference on Transforming Fall Management Prevention Practices. Clearwater, FL; May 2009.
  60. ‘Commercially available mats to prevent bed-related fall injuries’. 10th Annual Conference on Transforming Fall Management Prevention Practices. Clearwater, FL; May 2009.
  61. ‘Biomechanics of Traumatic Brain Injury’. Florida Public Defender’s ‘Life Over Death’ Annual Meeting. Naples, FL 2010
  62. ‘Technology Gaps Associated with Safe Patient Handling and Movement’. 11th Annual Safe Patient Handling and Movement Conference. Orlando. April 2011.
  63. ‘Biomechanics of Pediatric Brain Injury’. Department of Children and Families, Wildwood, FL. July 2012
  64. ‘Biomechanics of Pediatric Brain Injury’. Evidence Based Medicine and Social Investigation conference, Vancouver, Canada. August 3, 2012
  65. ‘Developing Helmet Standards and Testing Methods to Protect from Brain Injury’. Proceedings of the ASTM Symposium on Concussion in Sports. Atlanta, GA. November 20, 2012
  66. ‘Biomechanics of Pediatric Brain Injury’. Presented at Department of Office of the Public Defender, 13th Judicial Circuit, Tampa, FL. January 2013
  67. ‘Biomechanics of Inflicted Head Trauma’. Presented at 4th Penn State Hershey International Conference on Pediatric Abusive Head Trauma, June 27-28, 2013, Burlington, VT.
  68. Lloyd J. BRAINS Researchers Reveal Deficiencies in Football Helmet Design (0060) 11th Annual Conference on Brain Injury. September 18-21, 2013. New Orleans, LA.
  69. Lloyd J. Biomechanical Evaluation of Head Kinematics During Infant Shaking Versus Pediatric Activities of Daily Living. 11th Annual Conference on Brain Injury (0070). September 18-21, 2013. New Orleans, LA.
  70. Lloyd J. Biomechanics of Brain Injuries Associated with Short Falls in Children (0072). 11th Annual Conference on Brain Injury. September 18-21, 2013. New Orleans, LA.
  71. Lloyd J. Using LabVIEW to Design and Evaluate a Better Football Helmet. Tampabay LabVIEW users group meeting, May 21st, 2014. Tampa, FL.
  72. Lloyd J. Using LabVIEW and Compact DAQ for Brain Injury Research. NI week keynote presentation, August 5th, 2014. Austin, TX.
  73. Lloyd J. Using LabVIEW to Design and Evaluate a Better Football Helmet. NI week, August 7th, 2014. Austin, TX.
  74. Lloyd J. Mechanisms of Head and Brain Injury. Manasota Trial Lawyers Association meeting. August 27, 2014
  75. Lloyd JD, Willey E & Lee W. Biomechanical Evaluation of Head Kinematics During Infant Shaking Versus Pediatric Activities of Daily Living. American Academy of Forensic Sciences 2015 annual meeting, February 19th 2015. Orlando, FL.
  76. Lloyd JD & Lee WE. Biomechanical Evaluation of Inflicted Head Trauma. American Academy of Forensic Sciences 2015 annual meeting, February 19th 2015. Orlando, FL.
  77. Lloyd JD. Biomechanics of Short Falls in Children. American Academy of Forensic Sciences 2015 annual meeting, February 19th 2015. Orlando, FL.
  78. Lloyd JD. Biomechanical Evaluation of Shaken Impact Syndrome. American Academy of Forensic Sciences 2015 annual meeting, February 19th 2015. Orlando, FL.
  79. Lloyd JD. Biomechanics of Pediatric Head and Brain Trauma. Death is Different. February 20th, 2015. Orlando, FL.
  80. Lloyd J. Brain Injury in Sports. North American Brain Injury Society 13th Annual Conference on Brain Injury. April 8th, 2016. Tampa, FL
  81. Lloyd J. Biomechanical and Forensic Considerations of Pediatric Head Injury. Juvenile Law Dependency and Delinquency. Hosted by Florida Office of Criminal Conflict. Lake Mary, FL. June 8, 2017.
  82. Lloyd J. Accident Reconstruction and Human Risk Factors in Driver-Impaired Crashes. Hosted by Florida Bar Association, Masters of DUI seminar. Fort Lauderdale, FL. April 5, 2019.
  83. Lloyd J. Biomechanics of Head and Brain Injuries. American Academy of Forensic Sciences Virtual Annual Conference. February 18, 2021.
  84. Lloyd J. Distracted Driving: Causes and Consequences. IPTM Symposium on Traffic Safety. June 22, 2021.
  85. Lloyd J. Distracted Driving. WATAI Symposium on Human Factors. October 26, 2021.
  86. Lloyd J. Lead Vehicle Looming Crashes. WATAI Symposium on Human Factors. October 27, 2021.
  87. Lloyd J. Human Factors of Driving: Should We Be Allowed to Drive? WATAI Symposium on Human Factors. October 27, 2021.
  88. Lloyd J. Injury Biomechanics for the Accident Reconstructionist. WREX. April 19, 2023.
  89. Lloyd J & Forte M. Invesigating the How and Why of Motorcycle Accidents. FDLA. February 28, 2024.
  90. Lloyd J. Traumatic Brain Injuries in Helmeted Motorcycle Crashes. 68th STAPP Car Crash conference, Columbus, OH. October 24, 2024.

Poster Presentations

  1. ‘Biomechanical assessment and stress test of dynamic postural sway to predict falls in healthy elderly’ Research Day, James A. Haley Veteran’s Hospital, Tampa, FL; April 15, 1998.
  2. ‘Effect of wrist exposures on median nerve conduction’ Research Day, James A. Haley Veteran’s Hospital, Tampa, FL; April 15, 1998.
  3. ‘A Flick of the Wrist’. University of South Florida President’s Council fundraising dinner. Tampa, FL; September 1998.
  4. ‘Repetitive wrist movements: an adverse effect on the median nerve’. University of South Florida Health Sciences Research Day. Tampa, FL; February 25, 1999.
  5. ‘Neurovascular considerations of median nerve neuropathy and implications for clinical diagnosis’. American Society for Surgery of the Hand (ASSH). 54th Annual Meeting, Boston, MA; September 1999.
  6. ‘Safe Patient Room of the Future.’ James A. Haley Veterans Hospital Research Day, Tampa, FL; April 25, 2002.
  7. ‘Stretcher Lift Design and Prototype.’ James A. Haley Veterans Hospital Research Day, Tampa, FL; April 25, 2002.
  8. ‘Whole-Body Biomechanical Model for Dynamic Analysis of Human Motion’ James A. Haley Veterans Hospital Research Day, Tampa, FL; April 29, 2005.
  9. ‘Biomechanical Evaluation of Patient Falls from Bed’. Evidenced-Based Strategies for Patient Falls and Wandering, Clearwater, FL; May 2005.
  10. ‘Estimation, Simulation, and Experimentation of a Fall from Bed’ 8th Annual Conference on Fall Prevention Strategies, Clearwater, FL; April 2007.
  11. ‘Estimation, Simulation, and Experimentation of a Fall from Bed’ James A. Haley Veterans Hospital Research Day, Tampa, FL; May 2007.
  12. ‘Evaluation of Fall Protection and Prevention Technologies’. 8th Annual Conference on Fall Prevention Strategies. Clearwater, FL; April 2007.
  13. ‘Estimation, Simulation, and Experimentation of a Fall from Bed’. 9th Annual Conference on Fall Prevention Strategies. Clearwater, FL; April 2007.
  14. ‘Biomechanical evaluation of the LiftSeat for independent patient toileting tasks’. 9th Annual Safe Patient Handling and Movement Conference. Orlando. April 2009.
  15. ‘The effects of everyday concurrent tasks on 3D overground minimum toe clearance and gait parameters’. 10th Annual Conference on Transforming Fall Management Prevention Practices. Clearwater, FL; May 2009.
  16. ‘Impact Testing to Evaluate Materials for Head Protection Devices’. 10th Annual Conference on Transforming Fall Management Prevention Practices. Clearwater, FL; May 2009.
  17. ‘Toward a Cadeveric Biomechanical Understanding of Brain Kinematics Associated with TBI’. JAHVA Research Day, 2011
  18. ‘VHA Trends in the total costs of care for the polytrauma cohort: Disproportionate impact of post-acute inpatient care’. Federal Interagency Conference on Traumatic Brain Injury, 2011
  19. ‘Toward Biomechanical Understanding of Brain Kinematics Associated with TBI using cadaveric specimens’. Federal Interagency Conference on Traumatic Brain Injury, 2011
  20. ‘Do Ill-Fitting Helmets Amplify the Risk of Head Injury Among Youth Football Players? – a Biomechanical Analysis, with Discussion for Applicability to Military Protection’. Federal Interagency Conference on Traumatic Brain Injury, 2011
  21. ‘Do Helmets Prevent Concussion?’ 8th Annual Conference of Blast Traumatic Brain Injury, December 2011, Tampa.
  22. ‘Biomechanics of Blast TBI’. 8th Annual Conference of Blast Traumatic Brain Injury, December 2011, Tampa.
  23. ‘Tampa VA Brains Researchers Reveal Deficiencies in Helmet Design’. Military Health Systems Review Symposium. August 2013, Fort Lauderdale, FL
  24. ‘How Well Do Football Helmets Protect Against Concussion and Brain Injury? American Academy of Neurology. April 30th, 2014. Philadelphia, PA.
  25. EEG of Concussive Impact in Football. American Academy of Sports Neurology Sports Concussion meeting, July 2014. Chicago.
  26. Military Helmets May Provide Little Protection Against Traumatic Brain Injury. Military Health Systems Research Symposium. August 2014. Ft. Lauderdale.
  27. Lloyd JD & Conidi FX. Biomechanical Evaluation of Helmet Protection Against Concussion and TBI. International State-of-the-Science Meeting on the Biomedical Basis for Mild Traumatic Brain Injury (mTBI) Environmental Sensor Threshold Values. November 2014. MacLean, VA.
  28. Lloyd JD, Sabbagh J & Dickey C. Investigating the Effects of Mild Blast Injury on TBI Symptoms and Tau Pathology. International State-of-the-Science Meeting on the Biomedical Basis for Mild Traumatic Brain Injury (mTBI) Environmental Sensor Threshold Values. November 2014. MacLean, VA.
  29. Lloyd JD & Conidi FX. Do Football Helmet Add-Ons Reduce Concussion Risk? American Academy of Neurology Annual Meeting. April 2015. Washington, DC

Conferences Attended

  1. West Central Florida Area Agency on Aging conference; September 17, 1996.
  2. ITESM International Conference, Mexico City; September 24, 1996.
  3. American Occupational Health Conference, Orlando, FL; May 16, 1997.
  4. OSHA Regional Conference, Clearwater, FL; July 16, 1997.James A. Haley Veterans Hospital Research Day, FL; April 15, 1998.
  5. Prevention of Musculoskeletal Injuries in Healthcare Workers: State of the Science. Tampa, FL; May 15, 1998
  6. University of South Florida Health Sciences Research Day. Tampa, FL; February 25, 1999.
  7. Alabama Governor’s safety and health conference. August 29, 2000.
  8. VISN 8 PSCI Safe Patient Handling Conference, St. Petersburg Beach, FL; January 8-10, 2001.
  9. VISN 8 PSCI Safe Patient Handling Conference, Clearwater, FL; January 16-18, 2002.
  10. James A. Haley Veterans Hospital Research Day, Tampa, FL; April 25, 2002.
  11. VISN 8 PSCI Safe Patient Handling Conference, Clearwater, FL; March 4-7, 2003.
  12. Safe Patient Handling Conference. Orlando, FL; 2004.
  13. James A. Haley Veterans Hospital Research Day, Tampa, FL; April 29, 2005.
  14. Safe Patient Handling Conference. Clearwater, FL; 2005.
  15. Evidenced-Based Strategies for Patient Falls and Wandering, Clearwater, FL; May 2005.
  16. AASCIN Conference, Las Vegas, NV; September 2005.
  17. Safe Patient Handling and Movement Conference. St. Petersburg, FL; 2006.
  18. Evidence-Based Falls Prevention Conference. St. Petersburg, FL; 2006.
  19. AASCIN Conference, Las Vegas, NV; September 2006.
  20. James A. Haley Veterans Hospital Research Day, Tampa, FL; May 2007.
  21. 8th Annual Conference on Fall Prevention Strategies. Clearwater, FL; April 2007.
  22. Florida Justice Association. February 2007.
  23. 8th Annual Safe Patient Handling and Movement Conference. Orlando, FL; 2008.
  24. 9th Annual Safe Patient Handling and Movement Conference. Orlando. April 2009.
  25. 10th Annual Conference on Transforming Fall Management Prevention Practices. Clearwater, FL; May 2009.
  26. Florida Public Defender’s ‘Life Over Death’ Annual Meeting. Naples, FL September 2010
  27. American Academy of Forensic Sciences meeting, Chicago, IL. February 2011.
  28. Introduction to the STAR Helmet Rating System. Virginia Tech, Blacksburg, VA. 2011.
  29. 11th Annual Safe Patient Handling and Movement Conference. Orlando. April 2011.
  30. James A. Haley Veterans Hospital Research Day, Tampa, FL; May 2011.
  31. Federal Interagency Conference on Traumatic Brain Injury, 2011
  32. 8th Annual Conference of Blast Traumatic Brain Injury, Tampa, December 2011
  33. James A. Haley Veterans Hospital Research Day, Tampa, FL; May 2012.
  34. Evidence Based Medicine and Social Investigation conference, Vancouver, Canada. August 3, 2012
  35. New Orleans, LA. October 13-17, 2012
  36. Special Operation Medical Association / Blast Traumatic Brain Injury, Tampa, December 2012.
  37. American Academy of Forensic Sciences, Washington, DC. February 2013.
  38. 4th Penn State Hershey International Conference on Pediatric Abusive Head Trauma, June 27-28, 2013, Burlington, VT.
  39. North American Brain Injury Society 11th Annual Conference on Brain Injury. September 18-21, 2013. New Orleans, LA.
  40. North American Brain Injury Society 26th Annual Conference on Legal Issues in Brain Injury. September 18-21, 2013. New Orleans, LA.
  41. American Academy of Neurology 66th annual meeting. April 28-May 2, 2014. Philadelphia, PA.
  42. American Academy of Sports Neurology Sports Concussion meeting, July 2014. Chicago.
  43. NI week. August 3-7, 2014. Austin, TX.
  44. Military Health Systems Research Symposium. August 2014. Fort Lauderdale, FL.
  45. International State-of-the-Science Meeting on the Biomedical Basis for Mild Traumatic Brain Injury (mTBI) Environmental Sensor Threshold Values. November 2014. MacLean, VA.
  46. Engineering Dynamic Corporation Accident Reconstruction Course. November 10-14. Miami, FL.
  47. American Academy of Forensic Sciences annual meeting. February 2015. Orlando, FL.
  48. Florida Association of Criminal Defense Lawyers. Death is Different XXI. February 2015. Orlando, FL.
  49. SAE International, April 2015. Detroit, MI.
  50. National SBIR conference. June 15-17. National Harbor, MD.
  51. ASTM International F08 meeting. November, 2015. Orlando, FL
  52. North American Brain Injury Society 13th Annual Conference on Brain Injury. April 7-9, 2016. Tampa, FL.
  53. World Reconstruction Exposition. May 2-6, 2016. Orlando, FL
  54. National Neurotrauma Annual Meeting. June 26-29, 2016. Lexington, KY.
  55. ASTM International F08 meeting. November 13-18, 2016. Orlando, FL
  56. American Academy of Forensic Sciences annual meeting. February 2017. New Orleans, LA.
  57. Juvenile Law Dependency and Delinquency. Hosted by Florida Office of Criminal Conflict. June 8-9, 2017. Lake Mary, FL.
  58. ARC-CSI Accident Reconstruction Conference. September 18-21. Las Vegas, NV.
  59. IPTM Symposium on Traffic Safety. May 21-24, 2018. Orlando, FL
  60. IPTM Symposium on Traffic Safety. June 3-6, 2019. Orlando, FL
  61. American Society of Biomechanics Virtual Annual Conference. August 3-7, 2020.
  62. American Academy of Forensic Sciences Virtual Annual Conference. February 15-19, 2021
  63. IPTM Symposium on Traffic Safety. June 21-24, 2021. Orlando, FL.
  64. Pix4D conference. October 12-13, 2022. Denver, CO.
  65. WREX 2023. World Reconstruction Exposition. April 17-21, 2023. Orlando, FL
  66. NHTSA Workshop on Human Subjects for Biomechanical Research, Columbus, OH. October 21, 2024
  67. STAPP Car Crash conference, Columbus, OH. October 22-24, 2024

Teaching Activities – – Graduate Students Supervised

  • Robert Wilson, MS; USF Department of Electrical Engineering; 1998 – ‘Occupant trajectory determinant for vehicles equipped with airbag protection systems’
  • Brian Waldron, BS; USF Department of Mechanical Engineering; 2000/1 ‘Engineering evaluation and modeling of harness design in full-body sling lifts’ – served as mentor for MS thesis
  • Oneida Westhoff, MS; USF Department of Electrical Engineering; 2003 ‘Development of an Instrumented Mannequin for Safe Patient Handling and Movement’ – served as mentor and Professor on thesis committee
  • Tony Cresta, MS; USF Department of Biomedical Engineering; 2003-6 ‘Biomechanical evaluation of independent transfers and pressure relief tasks in persons with SCI’ – served as mentor and Professor on thesis committee
  • Sruthi Vasudev Boda, MS; USF Department of Biomedical Engineering; 2003 ‘Clinical evaluation of friction reducing devices for lateral transfer of patients’ – served as mentor and Professor on thesis committee
  • Roberto Guerra, BS: USF Department of Electrical Engineering; 2004 ‘Development of an Instrumented Mannequin for Personal Safety Training’
  • Tony Morreli, BS: USF Department of Electrical Engineering; 2004 – ‘Development of an Instrumented Mannequin for Personal Safety Training’
  • Bonnie Bowers, MS; USF Department of Biomedical Engineering; 2004/5 ‘Biomechanics of Injuries Associated with Falls from Bed’ – served as mentor and co-Major Professor on thesis committee
  • Fariba Vesali, MD; USF College of Medicine; 2004 ‘Biomechanical assessment of wheelchair transfers in persons with spinal cord injury’ – served as mentor for Medical residency program
  • Maria Symeonidis; USF Department of Electrical Engineering; 2004 ‘Biomechanics of Injuries Associated with Falls from Bed’
  • Jeffrey Harrow, PhD, MD; 2006 – served as mentor for Career Development Award
  • Brian Schulz, PhD; 2007 – served as mentor for Career Development Award
  • Shawn Applegarth, PhD (c); USF Department of Mechanical Engineering; 2006 – served as mentor for PhD dissertation in biomedical engineering
  • Michael Kerrigan; USF Department of Biomedical Engineering; 2008 ‘Evaluation of advanced materials to protect against fall-related head injuries ‘ – served as mentor and Major Professor on thesis committee
  • Lee Barks, PhD; 2008 – served as mentor for post-doctoral fellow
  • Karen Mann; USF Department of Biomedical Engineering; 2009 ‘Evaluation of Transfer Technologies to Preserve Shoulder Function in SCI‘ – served as mentor and Professor on thesis committee
  • Julie Kahn; USF Department of Biomedical Engineering; 2012-3. ‘Biomechanics of Patient Handling Slings Associated with Spinal Cord Injuries’ – served as mentor and Professor on thesis committee
  • Karthick Nateson; USF Department of Biomedical Engineering; 2018-9. ‘Comparison of Laboratory and Field Data Acquisition Devices for Human Activity Recording’ – served as a mentor and Professor on thesis committee
  • Jason Anderson; USF Department of Biomedical Engineering; 2020. ‘Psychology / Biomechanics of Falls Down Stairs’ – mentor and Co-Professor on thesis committee.

Intellectual Property

  1. Automotive Deceleration Indicator. Filed with USF Patents and Licensing office, 4/97.
  2. Automotive Audible Warning (Horn) Intensity Controller. Filed with USF Patents and Licensing office, 4/97.
  3. Determination of Occupant Trajectory in Airbag Protection Systems. Filed with USF Patents and Licensing office, 5/97.
  4. Airbag Deployment Directional Controller. Filed with USF Patents and Licensing office, 5/97. Patent application # WO2001044026A1 published 6/2001. Full patent not pursued.
  5. Airbag Depowerment Strategy as a Function of Impact Vector and Inertial Characteristics. Filed with USF Patents and Licensing office, 6/97.
  6. CPE USF Trademark / Service Mark / Certification Mark for display on ergonomically superior products. Filed with USF Patents and Licensing office, 7/97.
  7. Integrated vehicular security and personal assistance system. Filed with USF Patents and Licensing office, 10/97.
  8. Orthotic device to improve blood circulation in the median distribution of the hand. Filed with USF Patents and Licensing office, 3/98.
  9. Swimming pool feedback eyeball / diverter switch. Filed with USF Patents and Licensing office, 3/98.
  10. Method for biomechanical evaluation of joint kinematics. Filed with Department of Veteran’s Affairs patents and licensing office, 11/99.
  11. Integrated sling for patient lift manipulation. Filed with Department of Veteran’s Affairs patents and licensing office, 11/99.
  12. Technology improvement for air-assisted lateral transfer devices. Filed with Department of Veteran’s Affairs patents and licensing office, 7/02.
  13. Lateral Transfer Accessory. Patent awarded 10/3/06. # 7,114,203
  14. Limb Holding Device. Filed with Department of Veteran’s Affairs patents and licensing office, 09/06.
  15. Cerebral Stress Test for Objective Measurement of Brain Performance. Provisional Patent Application #61841612. 07/13. Full patent not pursued.
  16. Materials and their Application for Protection from Traumatic Brain Injury. Provisional Patent Application #61943488. 02/14. Full patent not pursued.
  17. Impact Absorbing Composite Material. Full US Patent Application. 05/14. Abandoned.
  18. Mathematical Method for Analysis of Helmet Protection Against Head and Brain Injury – filed with US Copyright Office 10/15. Abandoned.

Motorcycle Crash Expert

Motorcycles are considerably more complex to operate than cars, and riders are significantly more vulnerable to potentially devastating injuries. Motorcycle crashes may be caused by a number of factors, including rider error or inexperience, excessive speed, other driver distraction, carelessness or inattention, roadway or mechanical defects, and weather related hazards. For these reasons, a motorcycle crash expert is critically important in a motorcycle crash case.

Dr. Lloyd’s interest in motorcycling began at the age of 13, when he built his first motorcycle and learned to ride. Since that time he has amassed many years of technical expertise. In addition to holding a PhD in Ergonomics (Human Factors), with a specialization in Biomechanics, John holds several certifications in motorcycle accident reconstruction.

Based on his 38+ years of riding and advanced training as a motorcyclist, he is one of a few experts who have been admitted in court to testify regarding motorcycle handling and operation.

John Lloyd - motorcycle expert

Using his FAA part 109 pilot’s license, Dr. Lloyd can fly drones to generate 3D forensic maps of crash scenes for reconstruction purposes. Based on his PhD in human factors / ergonomics, John is qualified to address human factors issues including line of sight analysis, perception response time (PRT), distracted driving and impairment. Given his extensive experience as a senior researcher in biomechanics, with a specialization in head and brain injury biomechanics, including research and development of helmets, Dr. Lloyd is also uniquely qualified to opine on injury biomechanics and motorcycle helmet protection issues.

With combined expertise as a motorcyclist, accident reconstructionist, biomechanist, and human factors expert, Dr. Lloyd is often called upon to provide expert witness testimony in motorcycle accident cases. Such cases have included solo motorcycle accidents, motorcycle v auto accidentsmotorcycle crashes due to roadway defects as well as accidents attributable to mechanical failure or maintenance.

Links to several of Dr. Lloyd’s articles pertaining to motorcycle accident reconstruction and biomechanical evaluation of motorcycle helmets are presented below:

Please call Dr. Lloyd at 813-624-8986 or email DrJohnLloyd@Tampabay.RR.com to discuss how he can be of help to you with your case.

Expert in Motorcycle Accidents, Biomechanics & Human Factors

John Lloyd motorcycle accident crash expert

 John Lloyd, PhD, CPE, ACTAR has served as an expert witness for more than 30 years, providing nationwide expert testimony in motorcycle accident reconstructionmotorcycle riding and operationhuman factorsbiomechanics, and helmet protection

Dr. Lloyd’s expertise in motorcycle accident reconstruction, biomechanics, and human factors has been accepted by courts in numerous jurisdictions to provide analyses involving:

Unrivaled Expertise

Dr. Lloyd is a distinguished authority in motorcycle accident reconstruction and human factors analysis, with decades of experience. His understanding of the unique dynamics involved in motorcycle crashes sets him apart as a true specialist in the field.

John Lloyd expert witness accident reconstruction human factors biomechanics

John earned a Ph.D. in Ergonomics / Human Factors with a specialization in biomechanics from Loughborough University in England in 2002 and is Board Certified through the Board of Certification in Professional Ergonomics. He has has also attained Accreditation as a Traffic Accident Reconstructionist (ACTAR # 4658), with speciality certifications in motorcycle and motor vehicle accident reconstruction, as well as human factors.

Dr. Lloyd spent his career as a senior researcher at the VA Hospital in Tampa, FL, serving as Director of the Biomechanics Research Laboratory and Director of the Traumatic Brain Injury Research Laboratory. In addition he held a courtesy faculty appointment as Assistant Professor in the University of South Florida College of Engineering from 2002-2022, and is currently the Research Director of BRAINS, Inc.

To date, Dr. Lloyd’s work has been published in six book chapters and 33 peer-reviewed journals, as well as  presented at more than 100 national and international conferences (see curriculum vitae).

Comprehensive Approach

Dr. Lloyd goes beyond the obvious and delves deep into the technical intricacies of each case. As a multi-disciplinary expert he combines, accident reconstruction, biomechanics and human factors to provide a holistic view of the accident, ensuring no detail goes unanalyzed.

Accurate Motorcycle Crash Reconstructions

Using state-of-the-science reconstruction tools and real world data, Dr. Lloyd meticulously creates 3D accident reconstructions with unparalleled accuracy. This empowers him to provide precise insights into the sequence of events leading up to the incident.

Human Factors Insight

Understanding the role of human behavior is crucial in accident analysis. Dr. Lloyd’s human factors expertise allows him to investigate the cognitive factors affecting both motorcycle riders and automobile drivers, offering invaluable insights into decision-making processes.

Courtroom Excellence

Dr. Lloyd’s reputation as a credible and authoritative expert makes him an invaluable asset in the courtroom. He excels at conveying complex technical information to the jury in an accessible manner, helping you present a compelling case, backed by robust scientific analysis.

To date, Dr. Lloyd has provided expert witness Deposition and Trial Testimony in more than 160 civil and criminal cases. His expertise in motorcycle crashes, motorcycle riding and operation, helmet protection, biomechanics and human factors has been recognized by courts across the United States and Internationally. The analysis methods that Dr. Lloyd utilizes are published in peer-reviewed scientific journals.

Unquestionable Expert Integrity

Ethics and integrity are the cornerstones of our practice. You can trust that our analyses are unbiased, objective and founded on the highest standards of professionalism.

Contact

Please call Dr. Lloyd at 813-624-8986 or email John@DrBiomechanics.com to discuss how he can be of help to you with your case.

Alabama     Alaska     Arizona     Arkansas     California     Colorado     Connecticut     Delaware     Florida     Georgia     Hawaii     Idaho     Illinois     Indiana     Iowa     Kansas     Kentucky     Louisiana     Maine     Maryland     Massachusetts     Michigan     Minnesota     Mississippi     Missouri     Montana     Nebraska     Nevada     New Hampshire     New Jersey     New Mexico     New York     North Carolina     North Dakota     Ohio     Oklahoma     Oregon     Pennsylvania     Puerto Rico     Rhode Island     South Carolina     South Dakota     Tennessee     Texas     Utah     Vermont     Virginia     Washington     West Virginia     Wisconsin     Wyoming

Motorcycle Pothole Crash

Motorcycles are highly sensitive to changes in roadway conditions. Potholes can destabilize a motorcycle, causing the rider to lose control. The following is a case in which a rider claimed he was traveling at only 15 miles per hour, when he came upon a large pothole in the roadway and lost control. The motorcycle fell to the right, with the right foot peg penetrating the rider’s leg, leading to a near amputation of his right foot. Dr. Lloyd was retained to investigate the cause of the motorcycle pothole crash.

Test Instrumentation

An exemplar Honda CBR 929RR motorcycle was acquired and instrumented with accelerometers installed on the front axle, rear axle and handlebars:

motorcycle pothole crash sensors

Data acquisition was controlled using a National Instruments cDAQ 9178 and acquired at 10 kHz per channel on a Windows tablet running LabVIEW software:

motorcycle pothole crash data collection

Pothole Crash Testing

Using the instrumented motorcycle, Dr. Lloyd constructed an exemplar pothole in an open parking lot using ramps to investigate how the length and depth of the pothole affected stability of the motorcycle. In addition to sensors, testing was recorded using high speed and standard video, as well as GoPro cameras mounted on the motorcycle

motorcycle pothole crash testing

Results

Based on analyses and physical evidence, that the speed of the motorcycle while crossing the roadway defect was likely 14 -18 miles per hour. At such speeds, the front and rear suspensions have a tendency to approach maximum compression. along with substantial deformation of the tires.

Conclusions

Dr. Lloyd determined that the motorcycle crash was caused due to the motorcycle accelerating as it crossed the pothole. When the rear wheel crossed the fore edge of the defect it lost contact with the roadway and the rear wheel speed increased without resistance. Upon contact with the aft edge of the roadway defect the rear wheel was at a higher rate of speed than the rest of the motorcycle, causing the motorcycle to unexpectedly wheelie.

motorcycle pothole crash video

Please call Dr. Lloyd at 813-624-8986 or email DrJohnLloyd@Tampabay.RR.com to discuss how he can be of help to you with your case.

Biomechanics of Solo Motorcycle Accidents

The following is a peer-reviewed article on Motorcycle Accident Reconstruction, which was originally published in the Journal of Forensic Biomechanics in January 2016.

Corresponding author: John D Lloyd, Research Director, BRAINS, Inc., 32824 Michigan Avenue San Antonio, Florida, 33576, USA, Tel: 813-624-8986; Fax: 352-588-0688; E-mail: drjohnlloyd@tampabay.rr.com

  1. Abstract

In a motorcycle accident, the motorcycle and rider typically become independent, each following their own path to final rest. Consequently, the biomechanical analysis of a motorcycle accident reconstruction is complex. A biomechanical model to assess rider kinematics associated with motorcycle accidents is presented, which may be important to forensic scientists involved in the analysis of such events. This model can also be applied to other activities, including cycling, equestrian sports, skiing, skating, running, etc.

In a motorcycle accident reconstruction, it is first important to understand the mechanisms by which a rider may be ejected from their motorcycle and how drag factors affect the motorcycle and rider independently. Next we determine rider trajectory, taking into consideration rider anthropometry and posture, results from which are used to derive impact velocity as a function of linear and angular components. A case study is presented, demonstrating how the presented model can be applied to a collision involving a single motorcycle.

  1. Keywords:

    Forensic science; Biomechanics; Kinematics; Anthropometry; Motorcycle accident reconstruction

  2. Introduction to Motorcycle Accident Reconstruction

Motorcycles are a luxury in the developed world, where they are used mostly for recreation. Whereas in developing countries, motorcycles are required for utilitarian purposes due to lower prices and greater fuel economy. It is estimated that in 2016 there will be more than 134 million motorcycles worldwide [1], 60-80% of which are in the Asia Pacific and Southern and Eastern Asia regions. In 2011 there were more than 8.2 million registered motorcycles in the United States [2], representing 3% of all US registered vehicles, with California, Florida and Texas leading the number of motorcycles per state [3].

3.1. Epidemiology of motorcycle accidents

In the United States motorcyclists travelled 18.5 billion miles in 2011, which represents only 0.6% of total vehicle miles travelled, yet motorcyclists accounted for 14% (4,612) of traffic fatalities and 4% (81,000) of all occupant injuries [2]. According to the U.S. National Highway Traffic Safety Administration (NHTSA), when compared with automobiles, per vehicle mile traveled, motorcyclists’ risk of a fatal crash is 35 times greater than that of a car occupant [4].

Two major epidemiologic studies into the causation of motorcycle accidents have been conducted in North America and Europe: the Hurt Report and the MAIDS report. The Hurt Report [5] showed that failure of motorists to detect and recognize motorcycles in traffic is the prevailing cause of motorcycle accidents. Seventy-five percent of accidents were found to involve a motorcycle and a passenger vehicle, while the remaining 25% of accidents were single motorcycle accidents. Two-thirds of motorcycle-car crashes occurred when the car driver failed to see the approaching motorcycle and violated the rider’s right-of-way. Findings of the Hurt study indicate that severity of motorcyclist injury increase with speed, alcohol consumption, motorcycle size and speed.

The MAIDS study (Motorcycle Accidents In Depth Study) [6] is the most recent epidemiologic study of accidents involving motorcycles, scooters and mopeds, which was conducted in 1999 across five European countries to investigate motorcycle accident exposure data. Key findings show that passenger cars were the most frequent collision partner (60%), where 69% of the drivers report that they did not see the motorcycle and the predominance of motorcycle accidents (54.3%) occurred at an intersection.

In the United States alone, it is estimated that the total direct costs associated with motorcycle crashes in 2010 was approximately $16 billion. However, the US Government Accountability Office (GAO) predicts that full costs of motorcycle crashes are likely considerably higher because some difficult-to-measure costs, such as longer-term medical costs, are not included [7].

  1. Biomechanical Model

A new model is presented for the purpose of investigating motorcycle accident reconstruction biomechanics involving a lone motorcycle, which accounts for 25% of all motorcycle-related accidents according to the Hurt report [5]. This model is unique in that it incorporates measures of rider anthropometry (body measurements) and riding posture, which have a direct effect on trajectory and overall height of the vertical component of the impact.

The model presented herein may be applied not only to motorcycle accidents, but also to a wide range of activities, including cycling, equestrian sports, skiing, skating, running, etc.

  1. Methods

It is first important to understand the mechanisms by which a rider may be ejected from their motorcycle and how drag factors affect the motorcycle and rider independently. Next we determine rider trajectory, results from which are used to derive impact velocity as a function of linear and angular components. Finally, characteristics of the impact surface are considered with respect to impact accelerations.

5.1. Rider ejection

There are a number of ways that a rider can be ejected from the bike in a lone motorcycle accident. Two common ways of ejection are the lowside (Figure 1A) and highside (Figure 1B) crash. A rider may also be ejected over the handlebars (Figure 1C).

Figure 1 – Rider Ejected from Motorcycle

Rider Ejected from Motorcycle - Motorcycle Accident Reconstruction Expert Witness | Dr John Lloyd

The lowsider or lowside is a type of motorcycle crash usually occurring in a turn (Figure 1A). A lowside crash is caused when either the front or rear wheel slides out as a result of either too much braking in a corner, too much acceleration through or out of a corner, or too much speed carried into or through a corner for the available traction. A lowside crash may also be caused by unexpected slippery or loose material (such as oil, water, dirt or gravel) on the road surface.

A highsider or highside is a type of motorcycle accident characterized by sudden and violent rotation of the motorcycle about its longitudinal axis. This generally happens when the rear wheel loses traction, skids, and then suddenly regains traction, creating a large torque, ejecting the rider off the side of the motorcycle, oftentimes head-first (Figure 1B).

Highside and lowside accidents differ as follows: during a lowside the rear wheel slips laterally and continuously until the motorcycle falls onto the side facing the inside of the corner.Whereas during a highside crash the rear wheel slips laterally before suddenly regaining traction and flipping the motorcycle toward the outside of the corner (the higher side of the motorcycle). Highsides happen quickly and are very violent consequently injuries tend to be more severe in a high side crash, compared to a lowside crash.

Endo, short for “end over end,” occurs when the front end of a motorcycle stays fixed while the rear rotates up into the air, causing a rider to fly over the handlebars (Figure 1C).

5.2. Drag factors

Drag factors for motorcycles have been established based on motorcycle accident reconstruction and typically range from 0.2-1.0 [8], where 0.25 represents a motorcycle with a fairing [9], such as a sport motorcycle. Sport and sport touring motorcycles will likely slide further than a cruiser-style motorcycle, which have more external components that resist sliding, for which a drag factor of 0.5 is commonly adopted Table 1, below, presents drag factors for street motorcycles sliding on typical road surfaces [10-13].

Table 1: Drag Factors for Sliding Motorcycles

Drag Factors for Sliding Motorcycles - Motorcycle Accident Reconstruction Expert Witness | Dr John Lloyd

Drag factors for the rider are typically higher than those for motorcycles sliding on a dry asphalt or concrete roadway. An extensive series of motorcycle accident reconstruction tests were carried out by the West Midlands Police in the United Kingdom in which they calculated the drag factor value of a crash-test dummy sliding across an airfield surface. The resulting coefficient was found to vary between 0.57 and 0.85 for normal clothing [14].With similar drag factors for dry and wet roadway conditions [15]. For the purpose of accident reconstruction, a drag factor of 0.7 for a clothed individual sliding on a roadway is generally accepted.

Evidence from final rest positions of the motorcycle and rider can be used to establish whether the rider was involved in a lowside or highside motorcycle ejection. In a lowside crash the motorcycle will tend to slide further than the rider. Whereas in a highside crash, the rider is ejected from the motorcycle, traveling additional distance over ground in a similar direction to the motorcycle, prior to making contact with the ground and initiating the slide. Hence, in a highside crash, the final rest position of the rider may be beyond the final rest position of the motorcycle. Furthermore, in higher-energy ejection crashes the rider is more likely to both slide and tumble, resulting in a longer travel distance from location of ejection from the motorcycle, as well as additional injuries as evidenced by fractures, lacerations and contusions to various regions of the body.

5.3. Rider anthropometry

Anthropometry is the study of human body measurements. Rider anthropometry will directly affect fall height, since head center of mass (HCOM) and overall center of mass (RCOM) varies between individuals.

In a lowside crash, seated height of the center of mass (HCOM) of the rider’s head approximates vertical fall height. Whereas in a highside crash vertical fall height is a function of seated head CoM height (HCOM), plus additional height gained based on trajectory of the rider calculated with reference to overall center of mass of the rider (RCOM) (Figure 2).

Figure 2 – Fall Height Associated with Low side and High side Accidents

Fall Height Associated with Low side and High side Accidents - Motorcycle Accident Reconstruction Expert Witness | Dr John Lloyd

5.4. Rider center of mass

Rider center of mass height (RCOM) is located anatomically with respect to the second sacral vertebra (S2), which can be visually estimated as approximate in height to the omphalion (navel), and is measured vertically with respect to the road surface. The preferred method for determining RCOM is to measure seated height of the rider on the subject motorcycle (Figure 3). If the rider is not available due to injury or fatality, then an exemplar same-gender person of similar height and weight may be used. If the subject motorcycle is not available due to extent of damage, then an exemplar motorcycle should be obtained. With the motorcycle supported perpendicular to the road by an assistant (not on side stand or center stand), and rider’s hands on the handlebar grips and feet on the foot pegs, measure the vertical height from the ground to the motorcycle seat at the location of the ischial tuberosities (base of the pelvic bones at the seat surface). An anthropometer and spirit level should ideally be used for accuracy and measurements recorded in millimeters to maximize precision.

Figure 3 – Rider anthropometry

Rider Anthropometry - Motorcycle Accident Reconstruction Expert Witness | Dr John Lloyd

As an alternative method, rider seated height can be calculated by sourcing motorcycle seat height, from manufacturer specifications, from which a correction factor for suspension compression under mass of the rider is subtracted. Suspension compression, also known as sag, will vary by motorcycle type and mass of the rider. A general rule of thumb is that the front sag should be about 30-35% of travel, while the rear should be at about 25%, which equates to 30-40 mm at the front and 25-35 mm at the rear for most bikes [16]. Therefore, a reasonable correction factor for suspension sag is 30-35 mm.

For both methods, an adjustment must be added to the compressed seat height to determine RCOM. According to Pheasant [17], seated RCOM is equal to seat height plus 10% of total stature (standing height). This factor calculation is identical for both males and females (Table 2).

Table 2: Anthropometric Data

Anthropometry - Motorcycle Accident Reconstruction Expert Witness | Dr John Lloyd

5.5. Head center of mass

Head center of mass (HCOM) height can also be measured directly using the method described earlier, with the rider seated on the subject motorcycle in the correct riding position. An anthropometer is used to measure the vertical height from the ground. If the rider and/or subject motorcycle is unavailable, a substitute individual of similar height and weight and exemplar motorcycle may be used. The canthus (outer corner of the eye) is used as an anatomical landmark reference, equal in height to the center of mass of the head (Figure 3).

Alternatively, seated head center of mass (HCOM) can be calculated as a function of stature (standing height). Utilizing data from the 1988 Anthropometric Survey of U.S. Personnel [18], HCOM is derived by multiplying stature by 45.2%. Similar to the RCOM calculation, HCOM must be corrected for posture by multiplying HCOM by the cosine of seated back angle (β), measured with respect to the vertical axis.

5.6. Trajectory of the rider

The trajectory is the path that a rider is thrown or vaulted under the action of gravity, neglecting all other forces, such as friction from air resistance, without additional propulsion (Figure 4) and is defined by Equation 1.

Equation 1 – Trajectory of the ejected rider (y)Equation Trajectory of the Ejected Rider - Motorcycle Accident Reconstruction Expert Witness | Dr John Lloyd

Figure 4 – Trajectory of an Ejected Rider

Trajectory of an Ejected Rider - Motorcycle Accident Reconstruction Expert Witness | Dr John Lloyd

The following standard mathematical formulae are used to determine specific components of trajectory that are pertinent to the kinematic analysis of a rider ejected from a motorcycle.

5.7. Distance travelled

In a motorcycle accident reconstruction it may be possible to establish the actual distance of ejected travel of the rider, based upon location of ejection, typically between the end of any tire skid marks and start of gouge marks on the roadway, and location of bodily impact with the ground, identified by helmet paint transfer and/or identification of clothing fibers or body tissue on the roadway consistent with the rider. If the speed of the motorcycle at ejection (νejection) is also known, then the distance travelled (d) can be computed using the formula below, taking into account any correction factors for relative change in road height from location of ejection to impact.

Equation 2 – Horizontal distance traveled (d):Equation Horizontal Distance Travelled - Motorcycle Accident Reconstruction Expert Witness | Dr John Lloyd

However, the location of bodily impact is often difficult to identify, in which case reasonable assumptions may be made, including utilization of an estimated ejection angle (θ).

5.8. Maximum height

One of the most critical factors for determination of total impact velocity in a motorcycle accident reconstruction is the maximum height attained by an ejected rider, which is calculated according to

Equation 3 – Maximum height (h):Equation Maximum height - Motorcycle Accident Reconstruction Expert Witness | Dr John Lloyd

5.9. Ejection angle

The ejection angle (θ) is the angle at which a rider must be launched in order to travel a certain distance, given the initial velocity. Oftentimes, based on the final rest positions of the motorcycle and rider and in consideration of appropriate drag factors, it is possible to approximate rider ejection velocity. Air resistance is considered negligible, therefore angle and velocity at ejection are considered equal to the angle and velocity at impact.

Equation 4 – Ejection angle (θ):Equation Ejection Angle - Motorcycle Accident Reconstruction Expert Witness | Dr John Lloyd

5.10. Rider impact velocity

Total impact velocity is derived on the basis of its vertical, angular and travel velocity components.

5.11. Linear vertical impact velocity

Vertical impact velocity is computed as a function of seated head height, plus any additional height gained due to rider ejection from the motorcycle. The potential energy (P.E.) at any point will depend on the mass (m) at that point and its distance above the ground (h), multiplied by the gravitational acceleration constant (g) (Figure 5).

Figure 5 – Potential Energy of a Motorcyclist

Potential Energy of a Motorcyclist - Motorcycle Accident Reconstruction Expert Witness | Dr John Lloyd

The potential energy of the entire system is the integral of the energies of each finite mass element of the motorcycle plus rider over its height: . For simplification, we assume that the mass is evenly distributed over the system. Hence, P.E=m g h.

In physics, the law of conservation of energy governs that energy can neither be created nor destroyed, Potential Energy (P.E.) at the start of a fall must be equal to the Kinetic Energy (K.E.) at the end of the fall, which is expressed as the product of one half mass (½m) and impact velocity squared (v2). Therefore P.E. = K.E. = ½ mv2, Solving for linear impact velocity gives Equation 5:

Equation 5 – Linear impact velocity:   

Equation Linear Impact Velocity - Motorcycle Accident Reconstruction Expert Witness | Dr John Lloyd5.12. Angular vertical impact velocity

In real-world scenarios a falling rider will not follow a purely linear path [19], especially when coupled to a rigid body such as a motorcycle, hence angular velocity will also be generated (Figure 6).

Figure 6 – Falling Motorcyclist

Falling Motorcyclist - Motorcycle Accident Reconstruction Expert Witness | Dr John Lloyd

If a motorcyclist falls from a vertical to a horizontal position, we can assume that Potential Energy (P.E.) is converted to rotation: 1/2 m g h = ½ I ω2 where is the Moment of inertia, defined as the ratio of the angular momentum (L) of a system to its angular velocity (ω) around an axis: I=L/w which may also be expressed in terms of its mass (m) and its distance (r) from the pivot point as: I=mr2. Since r = h, the equation can be rewritten: mgh=1/2mh2w2. Instantaneous angular velocity at impact can be expressed in terms of linear components: ν = ω h, thus mgh=1/2mvwhich yields Equation 6:

Equation 6 – Instantaneous velocity due to angular rotation upon impact:Equation Instantaneous velocity due to angular rotation upon impact - Motorcycle Accident Reconstruction Expert Witness | Dr John Lloyd

Hence total impact velocity is the sum of its linear and angular components.

Therefore, the sum of impact velocity due to linear and angular components is greater than impact velocity due to linear components only and is expressed as:

Equation 7 – Impact velocity:

Equation Impact Velocity - Motorcycle Accident Reconstruction Expert Witness | Dr John Lloyd 5.13. Travel impact velocity

As previously stated, air resistance during a short fall is considered negligible, therefore angle and velocity at ejection (α, νejection) is considered equal to the angle and velocity at impact. Velocity due to ejection can be expressed in terms of its vertical and horizontal components . Assuming that ejection angle is measured with reference to the horizontal axis, then:
Equation 8a – Vertical ejection velocity:  Equation Vertical Ejection Velocity - Motorcycle Accident Reconstruction Expert Witness | Dr John Lloyd, and Equation 8b – Horizontal ejection velocity:Equation Horizontal Ejection Velocity - Motorcycle Accident Reconstruction Expert Witness | Dr John Lloyd

5.14. Impact velocity vector

The impact velocity vector has both vertical and horizontal components. The total vertical velocity is the sum of the linear and angular velocity components, plus the vertical components of velocity due to ejection. The total horizontal velocity will equal the horizontal component of velocity due to ejection. The magnitude of the impact velocity vector will be the square root of the sum of its vertical and horizontal components, hence:

Equation 9 – Impact velocity vector:Equation Impact Velocity Vector - Motorcycle Accident Reconstruction Expert Witness | Dr John Lloyd

and the effective angle of the impact velocity vector relative to the vertical axis is determined as:

Equation 10: Effective impact angle:Equation Effective Impact Angle - Motorcycle Accident Reconstruction Expert Witness | Dr John Lloyd

5.15. Impact acceleration

In a motorcycle accident reconstruction, impact acceleration is determined as a function of rate of change of impact velocity over time (t): , where the duration of the impact will be directly affected by the stopping distance of the impacted material. Roadside materials, such as grass or dirt inherently have larger stopping distances than typical roadway materials, such as asphalt or concrete. Hence, the impact accelerations experienced by a rider landing on a grassy area will be considerably less than if they impacted the roadway.

  1. Motorcycle Accident Reconstruction Case Study

A cruiser motorcycle was traveling along a divided highway, approaching an intersection, when a slow-moving automobile made an abrupt unanticipated lane change immediately in front of the motorcycle. The rider applied the brakes, locking up the rear wheel, causing the motorcycle to skid. The motorcyclist swerved in an attempt to avoid contact with the automobile. The left motorcycle footplate struck the rear corner of the automobile at an impact speed of 7.2 m/s (16 mph), causing the motorcycle to rotate violently about its long axis until the tires gained traction and the rider was thrown from the motorcycle. The final resting position of the rider was 4.6 m (15 ft.) past the final resting position of the motorcycle, to which the rider slid approximately 3.7 m (12 ft.) after being vaulted approximately 6.1 m (20 ft.) from the motorcycle (Figure 7).

Figure 7 – Case study: Automobile Avoidance Collision

Case study- Automobile Avoidance Collision - Motorcycle Accident Reconstruction Expert Witness | Dr John Lloyd

The rider center of mass was calculated based on anthropometric derivation from known standing height of 1.7 m (5’8”) and manufacturer’s seat height specification of 0.7 m (27.5”), from which a suspension compression factor of 30 mm (1.2”) was subtracted. Head center of mass was calculated to be 1.45 m (57”). Given a minimal back angle correction factor, based on rider position on a cruiser motorcycle, the corrected HCOM was 1.4 m (55”).

Based on the distance that the rider was thrown and given an ejection velocity of 16 mph an ejection angle of 42 degrees was computed in this motorcycle accident reconstruction. Hence, it was determined that the rider gained an additional height of 1.2 m (39”) due to ejection, which is added to the rider head center of mass height of 1.4 m (51”), for a total fall height of 2.6 m (8’6”). Using equation 7, an impact velocity of 8.0 m/s (18 mph) was calculated for the rotating fall. Since impact velocity and angle is assumed identical to ejected velocity and angle, travel velocity expressed in terms of its vertical and horizontal components, are 4.8 m/s (10.7 mph) and 5.3 m/s (11.9 mph), respectively. Therefore, the total impact velocity vertical and horizontal components are (8.0 + 4.8) = 12.8 m/s (28.7 mph) and 5.3 m/s (11.9 mph), respectively, with an effective impact angle of 22 degrees relative to the vertical axis.

The helmeted motorcyclist impacted an asphalt roadway, head first. Given the inherently very short stopping distance of such materials, the duration over which the impact velocity was experienced was very short, resulting in high impact accelerations, which produced life-threatening traumatic brain injuries.

The results computed by our motorcycle accident reconstruction model were validated by and corroborated based upon physical evidence from the accident scene as well as the physical evidence of the injuries sustained by the rider.

  1. Conclusions

The motorcycle accident reconstruction model presented herein has been successfully applied to a typical case study involving a single motorcycle collision. Measures of rider anthropometry were incorporated into the model. In the presented motorcycle accident reconstruction case study, the rider’s stature was smaller than that of an average male and seat height was lower than most stock motorcycles. Had average male stature and average motorcycle seat height been utilized, such assumptions would have over-estimated total fall height, thereby producing a calculated vertical impact velocity greater than was actually realized. In certain circumstances, specifically where ejection angle approaches 45 degrees, a simplified model without correction for rider anthropometry and rider posture might produce results that are in disagreement with physical evidence from the accident scene. However, this improved model is not without limitations. Specifically, if a rider were leaning the motorcycle considerably at the time of loss of control, such as when cornering, the initial vertical component (yo) would be reduced. This lean angle could be estimated given the radius of the corner and if the initial speed of the motorcycle can be computed. Overall, the validation of our new motorcycle accident reconstruction model is demonstrated in its application to the motorcycle accident reconstruction case study, which is in agreement with physical evidence from the accident scene.

 8. References

[1]     RnR Market Research (2014) Market Research Reports Press Release: Global motorcycles market demand to rise 7.2% annually to 2016. Published July 31.

[2]    National Safety Council (2013) Injury Facts – 2013 Edition. Itasca, IL..

[3]     Statista – The Statistics Portal. U.S. motorcycle registrations in 2012, by state http://www.statista.com/statistics/191002/number-of-registered-motorcycles-in-the-us-by-state/ accessed 12/23/2015.

[4]     NHTSA’s National Center for Statistics and Analysis (2007) Motorcycles Traffic Safety Fact Sheet (DOT-HS-810-990), 1200 New Jersey Avenue SE, Washington, DC 20590: National Highway Traffic Safety Administration.

[5]     Hurt HH, Ouellet JV, Thom DR (1981) Motorcycle Accident Cause Factors and Identification of Countermeasures. Volume 1: Technical Report. University of Southern California Traffic Safety Center, Los Angeles, CA..

[6]     ACEM (2000) MAIDS (Motorcycle Accidents In Depth Study): In-depth investigations of accidents involving powered two wheelers – Final Report. European Association of Motorcycle Manufacturers, Brussels..

[7]     U.S. Government Accountability Office (2012) Motorcycle Safety: Increasing Federal Funding Flexibility and Identifying Research Priorities Would Help Support States’ Safety Efforts. Report number GAO-13-42.

[8]     Obenski KS (1994) Motorcycle Accident Reconstruction: Understanding Motorcycles. Lawyers & Judges Publishing Co., Tucson, AZ..

[9]     Medwell C, McCarthy J, Shanahan M (1997) Motorcycle Slide to Stop Tests. SAE Technical Paper 970963., SP-1237 Accident Reconstruction and Animation VII, Warrendale, PA

[10]     Southwestern Association of Technical Accident Investigators (1984) Motorcycle Drag Factor Tests. Phoenix, AZ.

[11]     Day TD, Smith JR (1984) Friction Factor for Motorcycles Sliding on Various Surfaces. SAE paper 840250. Society of Automotive Engineers, Warrendale, PA.

[12]     Iowa State Patrol (1985) Motorcycle Test Skidding on its Side, Traffic Investigation Spring Seminar. Johnston, IA..

[13]     Royal Canadian Mounted Police (1984) Motorcycle Testing. Coquitlam, BC, Canada.

[14]     Hague DJ (2001) Calculation of Impact Speed from Pedestrian Slide Distance. Proceedings of The Institute of Traffic Accident Investigators International Conference

[15]    Searle JA, Searle A (1983) The Trajectories of Pedestrians, Motorcycles, Motorcyclists, etc., Following a Road Accident. SAE paper 831622.. Society of Automotive Engineers, Warrendale, PA.

[16]     Thede P, Parks L (2010) Race Tech’s Motorcycle Suspension Bible. Motorbooks International publisher, UK. Cd s.

[17]     Pheasant, S. (1998) Bodyspace. Taylor and Francis, London.

[18]     Gordon CC, Churchill T, Caluser CE, Brandtmiller CB, McConville JT et al. (1989).1988 Anthropometric Survey of US Army Personnel. US Army Technical Report TR-89/044. Natick, MA.

[19]           Barnett, RL (1995) The drunk, the child and the soldier – my how they fall. Triodyne Inc. Safety Bulletin. ISSN 1081-4140. Vol 2 (2).

Research

Biomechanical Analysis Athletic Protectors

Concussion and Brain Injury Associated with Headrest Impacts in Rear End Car Crashes

Helmeted Motorcyclist Fatality

Motorcycle Pothole Crash

Research Article “Biomechanics of Motorcycle Accidents” published in Journal of Forensic Biomechanics

Dr. John Lloyd is pleased to announce that his latest research on Motorcycle Accident Biomechanics was published in the Journal of Forensic Biomechanics on January 25th, 2016.

motorcycle accident biomechanics - Dr John Lloyd

Abstract:

Motorcycles are a luxury in the developed world, where they are used mostly for recreation. Whereas in developing countries, motorcycles are required for utilitarian purposes due to lower prices and greater fuel economy. It is estimated that in 2016 there will be more than 134 million motorcycles worldwide, 60-80% of which are in the Asia Pacific and Southern and Eastern Asia regions. In 2011 there were more than 8.2 million registered motorcycles in the United States, representing 3% of all US registered vehicles, with California, Florida and Texas leading the number of motorcycles per state.

In the United States motorcyclists travelled 18.5 billion miles in 2011, which represents only 0.6% of total vehicle miles travelled, yet motorcyclists accounted for 14% (4,612) of traffic fatalities and 4% (81,000) of all occupant injuries 2. According to the U.S. National Highway Traffic Safety Administration (NHTSA), when compared with automobiles, per vehicle mile traveled, motorcyclists’ risk of a fatal crash is 35 times greater than that of a car occupant

In a motorcycle accident, the motorcycle and rider typically become independent, each following their own path to final rest. Consequently, the biomechanical analysis of a motorcycle accident is complex. A biomechanical model to assess rider kinematics associated with motorcycle accidents is presented, which may be important to forensic scientists involved in the analysis of such events. This model can also be applied to other activities, including cycling, equestrian sports, skiing, skating, running, etc.

It is first important to understand the mechanisms by which a rider may be ejected from their motorcycle and how drag factors affect the motorcycle and rider independently. Next we determine rider trajectory, taking into consideration rider anthropometry and posture, results from which are used to derive impact velocity as a function of linear and angular components. A case study is presented, demonstrating how the presented model can be applied to a collision involving a single motorcycle.

Motorcycle Accident Expert in Biomechanics and Human Factors

Motorcycle Accident Expert

Motorcycle collision analysis is a highly specialized discipline in which Dr. Lloyd is eminently qualified as a motorcycle accident expert. In addition to holding a PhD in Ergonomics (Human Factors), with a specialization in Biomechanics, John has more that 20 years and 200,000 miles of experience riding motorcycles. John-Lloyd-motorcycle-accident-expertDr. Lloyd has completed numerous advanced programs, including Motorcycle Safety Foundation (MSF), Experienced Rider Course and Total Rider Tech Advanced training.

Motorcycle Helmets and Brain Injury

To consider whether a motorcycle helmet might reduce the risk of brain trauma in a motorcycle accident it is first important to understand the two primary mechanisms associated with traumatic brain injury – impact loading and impulse loading.

Impact loading involves a direct blow transmitted primarily through the center of mass of the head, resulting in extracranial focal injuries, such as contusions, lacerations and external hematomas, as well as skull fractures. Shock waves from blunt force trauma may also cause underlying focal brain injuries, such as cerebral contusions, subarachnoid hematomas and intracerebral hemorrhages. Whereas, impulse or inertial loading caused by sudden movement of the brain relative to the skull, produces cerebral concussion. Inertial loading at the surface of the brain can cause subdural hemorrhage due to bridging vein rupture, whereas if affecting the neural structures deeper within the brain can produce diffuse axonal injury (DAI).

Holbourn was the first to cite angular / rotational acceleration as an important mechanism in brain injury. Gennarelli, Thibault, and colleagues, in a series of studies using live primates and physical models investigated the role of rotational acceleration in brain injury. They concluded that angular acceleration contributes more than linear acceleration to brain injuries, including concussion, axonal injury, and subdural hematoma.

Motorcycle Helmet Testing

Traditional testing of motorcycle helmets focuses on reducing the effect of linear impact forces by dropping them from a given height onto an anvil and measuring the resultant peak linear acceleration. According to the Federal Motor Vehicle Safety Standard (FMVSS) 218, commonly known as the DOT helmet standard, the test involves dropping a motorcycle helmet onto a flat steel and hemispherical anvil at an impact velocity of 6.0 m/s (13.4mph).   In general, if peak linear acceleration is less than 400g, the helmet is considered acceptable. Current motorcycle helmet testing standards do not incorporate measures of angular acceleration and therefore do not address whether any helmets can provide adequate protection against catastrophic brain injuries, such as concussion, axonal injury and subdural hematoma.

In 1995, the European Commission Directorate General for Energy and Transport initiated a Cooperative Scientific and Technical Research (COST) program to investigate Motorcycle Safety Helmets. Several agencies from Finland, the United Kingdom, France and Germany participated in this study, which compiled and analyzed data from 4,700 motorcycle fatalities in Europe, each year. The COST report documents that 75% of all fatal motorcycle accidents involve head injury. Linear forces were present in only 31% of fatal head injuries, while rotational forces were found to be the primary cause in over 60% of cases. Within the scope of this study experiments were performed using drop tests with accelerometers to measure linear and rotational accelerations of the brain and skull mass associated with different types of impacts. These tests confirmed rotational acceleration to be a primary cause of brain injury in helmeted motorcycle accidents.

John-Lloyd-motorcycle-accident-expert-helmet

  • Rotational forces acting on the brain are the underlying cause of traumatic brain injuries.
  • Motorcycle helmets, including those certified under DOT and SNELL standards are designed to mitigate forces associated with linear acceleration.
  • Motorcycle helmets are not currently certified under either DOT or SNELL standard against their ability to protect against the angular / rotational forces.
  •  Epidemiologic evidence from the COST-327 report  indicates that motorcycle helmets do not provide adequate protection against closed head and brain injuries

Human Factors of Motorcycle Accidents

Human factors in vehicle collisions include all factors related to drivers and other road users that may contribute to a collision. Examples include driver behavior, visual and auditory acuity, decision-making ability, and reaction speed. A 1985 report based on British and American crash data found driver error, intoxication and other human factors contribute wholly or partly to about 93% of crashes.

Motorcycle Inspection

Motorcycle accident analysis often requires involves a teardown and careful inspection of the machine to investigate for possible contributing factors. Our engineers have a combined 70 years experience with motorcycle mechanics.

John Lloyd motorcycle accident expert inspection

A thorough evaluation includes inspection of tires, brakes, suspension setup, electrical components as well as any aftermarket parts.